Windows System Error Codes (exit codes) Description | Symantec

Loading...

Symantec is excited to announce our NEW blog platform (http://www.symantec.com/blogs/) to ensure our customers and partners have access to trustworthy, authoritative information and perspectives on a visually compelling platform.

+20

20 Votes

Windows System Error Codes (exit codes) Description By: Sidd (/connect/user/sidd) Created 28 Jan 2009 0



8 Comments

2

(http://en-us.reddit.com/submit?url=http://www.symantec.com/connect/articles/windows-system-error-codes-exit-codes-description) (/connect/forward?path=node/10851)

Like 1

Application installation (legacy setup applications or Windows installer applications) sometimes fails without any error message. These tasks will return exit/error codes when log file is generated. The following script will help in getting the Exit/Error code of Application installation else on can get it from log file. Dim oShell, MyApp, i Set oShell = CreateObject("WScript.Shell") MyApp = """C:\MyApplication\Setup.exe"" /Q" i = 0 i = oShell.Run(MyApp, 1 ,True) WScript.Echo "Exit Code is: " & (i) Set oShell = Nothing

Note: Use Silent switches according to the application. The table below describes system Exit/Error codes when a task is executed. The description of codes may help in identifying and troublshooting the issues. Code

Description

0

The operation completed successfully.

1

Incorrect function.

2

The system cannot find the file specified.

3

The system cannot find the path specified.

4

The system cannot open the file.

5

Access is denied.

6

The handle is invalid.

7

The storage control blocks were destroyed.

8

Not enough storage is available to process this command.

9

The storage control block address is invalid.

10

The environment is incorrect.

11

An attempt was made to load a program with an incorrect format.

12

The access code is invalid.

13

The data is invalid.

14

Not enough storage is available to complete this operation.

15

The system cannot find the drive specified.

16

The directory cannot be removed.

17

The system cannot move the file to a different disk drive.

18

There are no more files.

19

The media is write protected.

20

The system cannot find the device specified.

21

The device is not ready.

22

The device does not recognize the command.

23

Data error (cyclic redundancy check).

24

The program issued a command but the command length is incorrect.

25

The drive cannot locate a specific area or track on the disk.

26

The specified disk or diskette cannot be accessed.

27

The drive cannot find the sector requested.

28

The printer is out of paper.

29

The system cannot write to the specified device.

30

The system cannot read from the specified device.

31

A device attached to the system is not functioning.

32

The process cannot access the file because it is being used by another process.

33

The process cannot access the file because another process has locked a portion of the file.

34

The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1.

36

Too many files opened for sharing.

38

Reached the end of the file.

39

The disk is full.

50

The request is not supported.

51

Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator.

52

You were not connected because a duplicate name exists on the network. Go to System in the Control Panel to change the computer name and try again.

53

The network path was not found.

54

The network is busy.

55

The specified network resource or device is no longer available.

56

The network BIOS command limit has been reached.

57

A network adapter hardware error occurred.

58

The specified server cannot perform the requested operation.

59

An unexpected network error occurred.

60

The remote adapter is not compatible.

61

The printer queue is full.

62

Space to store the file waiting to be printed is not available on the server.

63

Your file waiting to be printed was deleted.

64

The specified network name is no longer available.

65

Network access is denied.

66

The network resource type is not correct.

67

The network name cannot be found.

68

The name limit for the local computer network adapter card was exceeded.

69

The network BIOS session limit was exceeded.

70

The remote server has been paused or is in the process of being started.

71

No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept.

72

The specified printer or disk device has been paused.

80

The file exists.

82

The directory or file cannot be created.

83

Fail on INT 24.

84

Storage to process this request is not available.

85

The local device name is already in use.

86

The specified network password is not correct.

87

The parameter is incorrect.

88

A write fault occurred on the network.

89

The system cannot start another process at this time.

100

Cannot create another system semaphore.

101

The exclusive semaphore is owned by another process.

102

The semaphore is set and cannot be closed.

103

The semaphore cannot be set again.

104

Cannot request exclusive semaphores at interrupt time.

105

The previous ownership of this semaphore has ended.

106

Insert the diskette for drive %1.

107

The program stopped because an alternate diskette was not inserted.

108

The disk is in use or locked by another process.

109

The pipe has been ended.

110

The system cannot open the device or file specified.

111

The file name is too long.

112

There is not enough space on the disk.

113

No more internal file identifiers available.

114

The target internal file identifier is incorrect.

117

The IOCTL call made by the application program is not correct.

118

The verify-on-write switch parameter value is not correct.

119

The system does not support the command requested.

120

This function is not supported on this system.

121

The semaphore timeout period has expired.

122

The data area passed to a system call is too small.

123

The filename, directory name, or volume label syntax is incorrect.

124

The system call level is not correct.

125

The disk has no volume label.

126

The specified module could not be found.

127

The specified procedure could not be found.

128

There are no child processes to wait for.

129

The %1 application cannot be run in Win32 mode.

130

Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O.

131

An attempt was made to move the file pointer before the beginning of the file.

132

The file pointer cannot be set on the specified device or file.

133

A JOIN or SUBST command cannot be used for a drive that contains previously joined drives.

134

An attempt was made to use a JOIN or SUBST command on a drive that has already been joined.

135

An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted.

136

The system tried to delete the JOIN of a drive that is not joined.

137

The system tried to delete the substitution of a drive that is not substituted.

138

The system tried to join a drive to a directory on a joined drive.

139

The system tried to substitute a drive to a directory on a substituted drive.

140

The system tried to join a drive to a directory on a substituted drive.

141

The system tried to SUBST a drive to a directory on a joined drive.

142

The system cannot perform a JOIN or SUBST at this time.

143

The system cannot join or substitute a drive to or for a directory on the same drive.

144

The directory is not a subdirectory of the root directory.

145

The directory is not empty.

146

The path specified is being used in a substitute.

147

Not enough resources are available to process this command.

148

The path specified cannot be used at this time.

149

An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute.

150

System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed.

151

The number of specified semaphore events for DosMuxSemWait is not correct.

152

DosMuxSemWait did not execute; too many semaphores are already set.

153

The DosMuxSemWait list is not correct.

154

The volume label you entered exceeds the label character limit of the target file system.

155

Cannot create another thread.

156

The recipient process has refused the signal.

157

The segment is already discarded and cannot be locked.

158

The segment is already unlocked.

159

The address for the thread ID is not correct.

160

The argument string passed to DosExecPgm is not correct.

161

The specified path is invalid.

162

A signal is already pending.

164

No more threads can be created in the system.

167

Unable to lock a region of a file.

170

The requested resource is in use.

173

A lock request was not outstanding for the supplied cancel region.

174

The file system does not support atomic changes to the lock type.

180

The system detected a segment number that was not correct.

182

The operating system cannot run %1.

183

Cannot create a file when that file already exists.

186

The flag passed is not correct.

187

The specified system semaphore name was not found.

188

The operating system cannot run %1.

189

The operating system cannot run %1.

190

The operating system cannot run %1.

191

Cannot run %1 in Win32 mode.

192

The operating system cannot run %1.

193

%1 is not a valid Win32 application.

194

The operating system cannot run %1.

195

The operating system cannot run %1.

196

The operating system cannot run this application program.

197

The operating system is not presently configured to run this application.

198

The operating system cannot run %1.

199

The operating system cannot run this application program.

200

The code segment cannot be greater than or equal to 64K.

201

The operating system cannot run %1.

202

The operating system cannot run %1.

203

The system could not find the environment option that was entered.

205

No process in the command subtree has a signal handler.

206

The filename or extension is too long.

207

The ring 2 stack is in use.

208

The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified.

209

The signal being posted is not correct.

210

The signal handler cannot be set.

212

The segment is locked and cannot be reallocated.

214

Too many dynamic-link modules are attached to this program or dynamic-link module.

215

Cannot nest calls to LoadModule.

216

The image file %1 is valid, but is for a machine type other than the current machine.

230

The pipe state is invalid.

231

All pipe instances are busy.

232

The pipe is being closed.

233

No process is on the other end of the pipe.

234

More data is available.

240

The session was canceled.

254

The specified extended attribute name was invalid.

255

The extended attributes are inconsistent.

258

The wait operation timed out.

259

No more data is available.

266

The copy functions cannot be used.

267

The directory name is invalid.

275

The extended attributes did not fit in the buffer.

276

The extended attribute file on the mounted file system is corrupt.

277

The extended attribute table file is full.

278

The specified extended attribute handle is invalid.

282

The mounted file system does not support extended attributes.

288

Attempt to release mutex not owned by caller.

298

Too many posts were made to a semaphore.

299

Only part of a ReadProcessMemory or WriteProcessMemory request was completed.

300

The oplock request is denied.

301

An invalid oplock acknowledgment was received by the system.

302

The volume is too fragmented to complete this operation.

303

The file cannot be opened because it is in the process of being deleted.

317

The system cannot find message text for message number 0x%1 in the message file for %2.

487

Attempt to access invalid address.

534

Arithmetic result exceeded 32 bits.

535

There is a process on other end of the pipe.

536

Waiting for a process to open the other end of the pipe.

994

Access to the extended attribute was denied.

995

The I/O operation has been aborted because of either a thread exit or an application request.

996

Overlapped I/O event is not in a signaled state.

997

Overlapped I/O operation is in progress.

998

Invalid access to memory location.

999

Error performing inpage operation.

1001

Recursion too deep; the stack overflowed.

1002

The window cannot act on the sent message.

1003

Cannot complete this function.

1004

Invalid flags.

1005

The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted.

1006

The volume for a file has been externally altered so that the opened file is no longer valid.

1007

The requested operation cannot be performed in full-screen mode.

1008

An attempt was made to reference a token that does not exist.

1009

The configuration registry database is corrupt.

1010

The configuration registry key is invalid.

1011

The configuration registry key could not be opened.

1012

The configuration registry key could not be read.

1013

The configuration registry key could not be written.

1014

One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful.

1015

The registry is corrupted. The structure of one of the files containing registry data is corrupted, or the system's memory image of the file is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted.

1016

An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system's image of the registry.

1017

The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format.

1018

Illegal operation attempted on a registry key that has been marked for deletion.

1019

System could not allocate the required space in a registry log.

1020

Cannot create a symbolic link in a registry key that already has subkeys or values.

1021

Cannot create a stable subkey under a volatile parent key.

1022

A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes.

1051

A stop control has been sent to a service that other running services are dependent on.

1052

The requested control is not valid for this service.

1053

The service did not respond to the start or control request in a timely fashion.

1054

A thread could not be created for the service.

1055

The service database is locked.

1056

An instance of the service is already running.

1057

The account name is invalid or does not exist, or the password is invalid for the account name specified.

1058

The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.

1059

Circular service dependency was specified.

1060

The specified service does not exist as an installed service.

1061

The service cannot accept control messages at this time.

1062

The service has not been started.

1063

The service process could not connect to the service controller.

1064

An exception occurred in the service when handling the control request.

1065

The database specified does not exist.

1066

The service has returned a service-specific error code.

1067

The process terminated unexpectedly.

1068

The dependency service or group failed to start.

1069

The service did not start due to a logon failure.

1070

After starting, the service hung in a start-pending state.

1071

The specified service database lock is invalid.

1072

The specified service has been marked for deletion.

1073

The specified service already exists.

1074

The system is currently running with the last-known-good configuration.

1075

The dependency service does not exist or has been marked for deletion.

1076

The current boot has already been accepted for use as the last-known-good control set.

1077

No attempts to start the service have been made since the last boot.

1078

The name is already in use as either a service name or a service display name.

1079

The account specified for this service is different from the account specified for other services running in the same process.

1080

Failure actions can only be set for Win32 services, not for drivers.

1081

This service runs in the same process as the service control manager. Therefore, the service control manager cannot take action if this service's process terminates unexpectedly.

1082

No recovery program has been configured for this service.

1083

The executable program that this service is configured to run in does not implement the service.

1084

This service cannot be started in Safe Mode.

1100

The physical end of the tape has been reached.

1101

A tape access reached a filemark.

1102

The beginning of the tape or a partition was encountered.

1103

A tape access reached the end of a set of files.

1104

No more data is on the tape.

1105

Tape could not be partitioned.

1106

When accessing a new tape of a multivolume partition, the current block size is incorrect.

1107

Tape partition information could not be found when loading a tape.

1108

Unable to lock the media eject mechanism.

1109

Unable to unload the media.

1110

The media in the drive may have changed.

1111

The I/O bus was reset.

1112

No media in drive.

1113

No mapping for the Unicode character exists in the target multi-byte code page.

1114

A dynamic link library (DLL) initialization routine failed.

1115

A system shutdown is in progress.

1116

Unable to abort the system shutdown because no shutdown was in progress.

1117

The request could not be performed because of an I/O device error.

1118

No serial device was successfully initialized. The serial driver will unload.

1119

Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened.

1120

A serial I/O operation was completed by another write to the serial port. (The IOCTL_SERIAL_XOFF_COUNTER reached zero.)

1121

A serial I/O operation completed because the timeout period expired. (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)

1122

No ID address mark was found on the floppy disk.

1123

Mismatch between the floppy disk sector ID field and the floppy disk controller track address.

1124

The floppy disk controller reported an error that is not recognized by the floppy disk driver.

1125

The floppy disk controller returned inconsistent results in its registers.

1126

While accessing the hard disk, a recalibrate operation failed, even after retries.

1127

While accessing the hard disk, a disk operation failed even after retries.

1128

While accessing the hard disk, a disk controller reset was needed, but even that failed.

1129

Physical end of tape encountered.

1130

Not enough server storage is available to process this command.

1131

A potential deadlock condition has been detected.

1132

The base address or the file offset specified does not have the proper alignment.

1140

An attempt to change the system power state was vetoed by another application or driver.

1141

The system BIOS failed an attempt to change the system power state.

1142

An attempt was made to create more links on a file than the file system supports.

1150

The specified program requires a newer version of Windows.

1151

The specified program is not a Windows or MS-DOS program.

1152

Cannot start more than one instance of the specified program.

1153

The specified program was written for an earlier version of Windows.

1154

One of the library files needed to run this application is damaged.

1155

No application is associated with the specified file for this operation.

1156

An error occurred in sending the command to the application.

1157

One of the library files needed to run this application cannot be found.

1158

The current process has used all of its system allowance of handles for Window Manager objects.

1159

The message can be used only with synchronous operations.

1160

The indicated source element has no media.

1161

The indicated destination element already contains media.

1162

The indicated element does not exist.

1163

The indicated element is part of a magazine that is not present.

1164

The indicated device requires reinitialization due to hardware errors.

1165

The device has indicated that cleaning is required before further operations are attempted.

1166

The device has indicated that its door is open.

1167

The device is not connected.

1168

Element not found.

1169

There was no match for the specified key in the index.

1170

The property set specified does not exist on the object.

1171

The point passed to GetMouseMovePointsEx is not in the buffer.

1172

The tracking (workstation) service is not running.

1173

The Volume ID could not be found.

1175

Unable to remove the file to be replaced.

1176

Unable to move the replacement file to the file to be replaced. The file to be replaced has retained its original name.

1177

Unable to move the replacement file to the file to be replaced. The file to be replaced has been renamed using the backup name.

1178

The volume change journal is being deleted.

1179

The volume change journal is not active.

1180

A file was found, but it may not be the correct file.

1181

The journal entry has been deleted from the journal.

1200

The specified device name is invalid.

1201

The device is not currently connected but it is a remembered connection.

1202

The local device name has a remembered connection to another network resource.

1203

No network provider accepted the given network path.

1204

The specified network provider name is invalid.

1205

Unable to open the network connection profile.

1206

The network connection profile is corrupted.

1207

Cannot enumerate a noncontainer.

1208

An extended error has occurred.

1209

The format of the specified group name is invalid.

1210

The format of the specified computer name is invalid.

1211

The format of the specified event name is invalid.

1212

The format of the specified domain name is invalid.

1213

The format of the specified service name is invalid.

1214

The format of the specified network name is invalid.

1215

The format of the specified share name is invalid.

1216

The format of the specified password is invalid.

1217

The format of the specified message name is invalid.

1218

The format of the specified message destination is invalid.

1219

Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again.

1220

An attempt was made to establish a session to a network server, but there are already too many sessions established to that server.

1221

The workgroup or domain name is already in use by another computer on the network.

1222

The network is not present or not started.

1223

The operation was canceled by the user.

1224

The requested operation cannot be performed on a file with a user-mapped section open.

1225

The remote system refused the network connection.

1226

The network connection was gracefully closed.

1227

The network transport endpoint already has an address associated with it.

1228

An address has not yet been associated with the network endpoint.

1229

An operation was attempted on a nonexistent network connection.

1230

An invalid operation was attempted on an active network connection.

1231

The network location cannot be reached. For information about network troubleshooting, see Windows Help.

1232

The network location cannot be reached. For information about network troubleshooting, see Windows Help.

1233

The network location cannot be reached. For information about network troubleshooting, see Windows Help.

1234

No service is operating at the destination network endpoint on the remote system.

1235

The request was aborted.

1236

The network connection was aborted by the local system.

1237

The operation could not be completed. A retry should be performed.

1238

A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached.

1239

Attempting to log in during an unauthorized time of day for this account.

1240

The account is not authorized to log in from this station.

1241

The network address could not be used for the operation requested.

1242

The service is already registered.

1243

The specified service does not exist.

1244

The operation being requested was not performed because the user has not been authenticated.

1245

The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist.

1246

Continue with work in progress.

1247

An attempt was made to perform an initialization operation when initialization has already been completed.

1248

No more local devices.

1249

The specified site does not exist.

1250

A domain controller with the specified name already exists.

1251

This operation is supported only when you are connected to the server.

1252

The group policy framework should call the extension even if there are no changes.

1253

The specified user does not have a valid profile.

1254

This operation is not supported on a Microsoft Small Business Server.

1255

The server machine is shutting down.

1256

The remote system is not available. For information about network troubleshooting, see Windows Help.

1257

The security identifier provided is not from an account domain.

1258

The security identifier provided does not have a domain component.

1259

AppHelp dialog canceled thus preventing the application from starting.

1260

Windows cannot open this program because it has been prevented by a software restriction policy. For more information, open Event Viewer or contact your system administrator.

1261

A program attempt to use an invalid register value. Normally caused by an uninitialized register. This error is Itanium specific.

1262

The share is currently offline or does not exist.

1263

The kerberos protocol encountered an error while validating the KDC certificate during smartcard logon.

1264

The kerberos protocol encountered an error while attempting to utilize the smartcard subsystem.

1265

The system detected a possible attempt to compromise security. Please ensure that you can contact the server that authenticated you.

1266

The smartcard certificate used for authentication has been revoked. Please contact your system administrator. There may be additional information in the event log.

1267

An untrusted certificate authority was detected while processing the smartcard certificate used for authentication. Please contact your system administrator.

1268

The revocation status of the smartcard certificate used for authentication could not be determined. Please contact your system administrator.

1269

The smartcard certificate used for authentication was not trusted. Please contact your system administrator.

1270

The smartcard certificate used for authentication has expired. Please contact your system administrator.

1271

The machine is locked and cannot be shut down without the force option.

1273

An application-defined callback gave invalid data when called.

1274

The group policy framework should call the extension in the synchronous foreground policy refresh.

1275

This driver has been blocked from loading.

1276

A dynamic link library (DLL) referenced a module that was neither a DLL nor the process's executable image.

1300

Not all privileges referenced are assigned to the caller.

1301

Some mapping between account names and security IDs was not done.

1302

No system quota limits are specifically set for this account.

1303

No encryption key is available. A well-known encryption key was returned.

1304

The password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a NULL string.

1305

The revision level is unknown.

1306

Indicates two revision levels are incompatible.

1307

This security ID may not be assigned as the owner of this object.

1308

This security ID may not be assigned as the primary group of an object.

1309

An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.

1310

The group may not be disabled.

1311

There are currently no logon servers available to service the logon request.

1312

A specified logon session does not exist. It may already have been terminated.

1313

A specified privilege does not exist.

1314

A required privilege is not held by the client.

1315

The name provided is not a properly formed account name.

1316

The specified user already exists.

1317

The specified user does not exist.

1318

The specified group already exists.

1319

The specified group does not exist.

1320

Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member.

1321

The specified user account is not a member of the specified group account.

1322

The last remaining administration account cannot be disabled or deleted.

1323

Unable to update the password. The value provided as the current password is incorrect.

1324

Unable to update the password. The value provided for the new password contains values that are not allowed in passwords.

1325

Unable to update the password. The value provided for the new password does not meet the length, complexity, or history requirement of the domain.

1326

Logon failure: unknown user name or bad password.

1327

Logon failure: user account restriction. Possible reasons are blank passwords not allowed, logon hour restrictions, or a policy restriction has been enforced.

1328

Logon failure: account logon time restriction violation.

1329

Logon failure: user not allowed to log on to this computer.

1330

Logon failure: the specified account password has expired.

1331

Logon failure: account currently disabled.

1332

No mapping between account names and security IDs was done.

1333

Too many local user identifiers (LUIDs) were requested at one time.

1334

No more local user identifiers (LUIDs) are available.

1335

The subauthority part of a security ID is invalid for this particular use.

1336

The access control list (ACL) structure is invalid.

1337

The security ID structure is invalid.

1338

The security descriptor structure is invalid.

1340

The inherited access control list (ACL) or access control entry (ACE) could not be built.

1341

The server is currently disabled.

1342

The server is currently enabled.

1343

The value provided was an invalid value for an identifier authority.

1344

No more memory is available for security information updates.

1345

The specified attributes are invalid, or incompatible with the attributes for the group as a whole.

1346

Either a required impersonation level was not provided, or the provided impersonation level is invalid.

1347

Cannot open an anonymous level security token.

1348

The validation information class requested was invalid.

1349

The type of the token is inappropriate for its attempted use.

1350

Unable to perform a security operation on an object that has no associated security.

1351

Configuration information could not be read from the domain controller, either because the machine is unavailable, or access has been denied.

1352

The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation.

1353

The domain was in the wrong state to perform the security operation.

1354

This operation is only allowed for the Primary Domain Controller of the domain.

1355

The specified domain either does not exist or could not be contacted.

1356

The specified domain already exists.

1357

An attempt was made to exceed the limit on the number of domains per server.

1358

Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk.

1359

An internal error occurred.

1360

Generic access types were contained in an access mask which should already be mapped to nongeneric types.

1361

A security descriptor is not in the right format (absolute or self-relative).

1362

The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process.

1363

Cannot start a new logon session with an ID that is already in use.

1364

A specified authentication package is unknown.

1365

The logon session is not in a state that is consistent with the requested operation.

1366

The logon session ID is already in use.

1367

A logon request contained an invalid logon type value.

1368

Unable to impersonate using a named pipe until data has been read from that pipe.

1369

The transaction state of a registry subtree is incompatible with the requested operation.

1370

An internal security database corruption has been encountered.

1371

Cannot perform this operation on built-in accounts.

1372

Cannot perform this operation on this built-in special group.

1373

Cannot perform this operation on this built-in special user.

1374

The user cannot be removed from a group because the group is currently the user's primary group.

1375

The token is already in use as a primary token.

1376

The specified local group does not exist.

1377

The specified account name is not a member of the local group.

1378

The specified account name is already a member of the local group.

1379

The specified local group already exists.

1380

Logon failure: the user has not been granted the requested logon type at this computer.

1381

The maximum number of secrets that may be stored in a single system has been exceeded.

1382

The length of a secret exceeds the maximum length allowed.

1383

The local security authority database contains an internal inconsistency.

1384

During a logon attempt, the user's security context accumulated too many security IDs.

1385

Logon failure: the user has not been granted the requested logon type at this computer.

1386

A cross-encrypted password is necessary to change a user password.

1387

A new member could not be added to or removed from the local group because the member does not exist.

1388

A new member could not be added to a local group because the member has the wrong account type.

1389

Too many security IDs have been specified.

1390

A cross-encrypted password is necessary to change this user password.

1391

Indicates an ACL contains no inheritable components.

1392

The file or directory is corrupted and unreadable.

1393

The disk structure is corrupted and unreadable.

1394

There is no user session key for the specified logon session.

1395

The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because there are already as many connections as the service can accept.

1396

Logon Failure: The target account name is incorrect.

1397

Mutual Authentication failed. The server's password is out of date at the domain controller.

1398

There is a time and/or date difference between the client and server.

1399

This operation cannot be performed on the current domain.

1400

Invalid window handle.

1401

Invalid menu handle.

1402

Invalid cursor handle.

1403

Invalid accelerator table handle.

1404

Invalid hook handle.

1405

Invalid handle to a multiple-window position structure.

1406

Cannot create a top-level child window.

1407

Cannot find window class.

1408

Invalid window; it belongs to other thread.

1409

Hot key is already registered.

1410

Class already exists.

1411

Class does not exist.

1412

Class still has open windows.

1413

Invalid index.

1414

Invalid icon handle.

1415

Using private DIALOG window words.

1416

The list box identifier was not found.

1417

No wildcards were found.

1418

Thread does not have a clipboard open.

1419

Hot key is not registered.

1420

The window is not a valid dialog window.

1421

Control ID not found.

1422

Invalid message for a combo box because it does not have an edit control.

1423

The window is not a combo box.

1424

Height must be less than 256.

1425

Invalid device context (DC) handle.

1426

Invalid hook procedure type.

1427

Invalid hook procedure.

1428

Cannot set nonlocal hook without a module handle.

1429

This hook procedure can only be set globally.

1430

The journal hook procedure is already installed.

1431

The hook procedure is not installed.

1432

Invalid message for single-selection list box.

1433

LB_SETCOUNT sent to non-lazy list box.

1434

This list box does not support tab stops.

1435

Cannot destroy object created by another thread.

1436

Child windows cannot have menus.

1437

The window does not have a system menu.

1438

Invalid message box style.

1439

Invalid system-wide (SPI_*) parameter.

1440

Screen already locked.

1441

All handles to windows in a multiple-window position structure must have the same parent.

1442

The window is not a child window.

1443

Invalid GW_* command.

1444

Invalid thread identifier.

1445

Cannot process a message from a window that is not a multiple document interface (MDI) window.

1446

Popup menu already active.

1447

The window does not have scroll bars.

1448

Scroll bar range cannot be greater than MAXLONG.

1449

Cannot show or remove the window in the way specified.

1450

Insufficient system resources exist to complete the requested service.

1451

Insufficient system resources exist to complete the requested service.

1452

Insufficient system resources exist to complete the requested service.

1453

Insufficient quota to complete the requested service.

1454

Insufficient quota to complete the requested service.

1455

The paging file is too small for this operation to complete.

1456

A menu item was not found.

1457

Invalid keyboard layout handle.

1458

Hook type not allowed.

1459

This operation requires an interactive window station.

1460

This operation returned because the timeout period expired.

1461

Invalid monitor handle.

1500

The event log file is corrupted.

1501

No event log file could be opened, so the event logging service did not start.

1502

The event log file is full.

1503

The event log file has changed between read operations.

1601

The Windows Installer service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed. Contact your support personnel for assistance.

1602

User cancelled installation.

1603

Fatal error during installation.

1604

Installation suspended, incomplete.

1605

This action is only valid for products that are currently installed.

1606

Feature ID not registered.

1607

Component ID not registered.

1608

Unknown property.

1609

Handle is in an invalid state.

1610

The configuration data for this product is corrupt. Contact your support personnel.

1611

Component qualifier not present.

1612

The installation source for this product is not available. Verify that the source exists and that you can access it.

1613

This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service.

1614

Product is uninstalled.

1615

SQL query syntax invalid or unsupported.

1616

Record field does not exist.

1617

The device has been removed.

1618

Another installation is already in progress. Complete that installation before proceeding with this install.

1619

This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package.

1620

This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package.

1621

There was an error starting the Windows Installer service user interface. Contact your support personnel.

1622

Error opening installation log file. Verify that the specified log file location exists and that you can write to it.

1623

The language of this installation package is not supported by your system.

1624

Error applying transforms. Verify that the specified transform paths are valid.

1625

This installation is forbidden by system policy. Contact your system administrator.

1626

Function could not be executed.

1627

Function failed during execution.

1628

Invalid or unknown table specified.

1629

Data supplied is of wrong type.

1630

Data of this type is not supported.

1631

The Windows Installer service failed to start. Contact your support personnel.

1632

The Temp folder is on a drive that is full or inaccessible. Free up space on the drive or verify that you have write permission on the Temp folder.

1633

This installation package is not supported by this processor type. Contact your product vendor.

1634

Component not used on this computer.

1635

This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package.

1636

This patch package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer patch package.

1637

This patch package cannot be processed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service.

1638

Another version of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel.

1639

Invalid command line argument. Consult the Windows Installer SDK for detailed command line help.

1640

Only administrators have permission to add, remove, or configure server software during a Terminal Services remote session. If you want to install or configure software on the server, contact your network administrator.

1641

The requested operation completed successfully. The system will be restarted so the changes can take effect.

1642

The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch.

1643

The patch package is not permitted by software restriction policy.

1644

One or more customizations are not permitted by software restriction policy.

1700

The string binding is invalid.

1701

The binding handle is not the correct type.

1702

The binding handle is invalid.

1703

The RPC protocol sequence is not supported.

1704

The RPC protocol sequence is invalid.

1705

The string universal unique identifier (UUID) is invalid.

1706

The endpoint format is invalid.

1707

The network address is invalid.

1708

No endpoint was found.

1709

The timeout value is invalid.

1710

The object universal unique identifier (UUID) was not found.

1711

The object universal unique identifier (UUID) has already been registered.

1712

The type universal unique identifier (UUID) has already been registered.

1713

The RPC server is already listening.

1714

No protocol sequences have been registered.

1715

The RPC server is not listening.

1716

The manager type is unknown.

1717

The interface is unknown.

1718

There are no bindings.

1719

There are no protocol sequences.

1720

The endpoint cannot be created.

1721

Not enough resources are available to complete this operation.

1722

The RPC server is unavailable.

1723

The RPC server is too busy to complete this operation.

1724

The network options are invalid.

1725

There are no remote procedure calls active on this thread.

1726

The remote procedure call failed.

1727

The remote procedure call failed and did not execute.

1728

A remote procedure call (RPC) protocol error occurred.

1730

The transfer syntax is not supported by the RPC server.

1732

The universal unique identifier (UUID) type is not supported.

1733

The tag is invalid.

1734

The array bounds are invalid.

1735

The binding does not contain an entry name.

1736

The name syntax is invalid.

1737

The name syntax is not supported.

1739

No network address is available to use to construct a universal unique identifier (UUID).

1740

The endpoint is a duplicate.

1741

The authentication type is unknown.

1742

The maximum number of calls is too small.

1743

The string is too long.

1744

The RPC protocol sequence was not found.

1745

The procedure number is out of range.

1746

The binding does not contain any authentication information.

1747

The authentication service is unknown.

1748

The authentication level is unknown.

1749

The security context is invalid.

1750

The authorization service is unknown.

1751

The entry is invalid.

1752

The server endpoint cannot perform the operation.

1753

There are no more endpoints available from the endpoint mapper.

1754

No interfaces have been exported.

1755

The entry name is incomplete.

1756

The version option is invalid.

1757

There are no more members.

1758

There is nothing to unexport.

1759

The interface was not found.

1760

The entry already exists.

1761

The entry is not found.

1762

The name service is unavailable.

1763

The network address family is invalid.

1764

The requested operation is not supported.

1765

No security context is available to allow impersonation.

1766

An internal error occurred in a remote procedure call (RPC).

1767

The RPC server attempted an integer division by zero.

1768

An addressing error occurred in the RPC server.

1769

A floating-point operation at the RPC server caused a division by zero.

1770

A floating-point underflow occurred at the RPC server.

1771

A floating-point overflow occurred at the RPC server.

1772

The list of RPC servers available for the binding of auto handles has been exhausted.

1773

Unable to open the character translation table file.

1774

The file containing the character translation table has fewer than 512 bytes.

1775

A null context handle was passed from the client to the host during a remote procedure call.

1777

The context handle changed during a remote procedure call.

1778

The binding handles passed to a remote procedure call do not match.

1779

The stub is unable to get the remote procedure call handle.

1780

A null reference pointer was passed to the stub.

1781

The enumeration value is out of range.

1782

The byte count is too small.

1783

The stub received bad data.

1784

The supplied user buffer is not valid for the requested operation.

1785

The disk media is not recognized. It may not be formatted.

1786

The workstation does not have a trust secret.

1787

The security database on the server does not have a computer account for this workstation trust relationship.

1788

The trust relationship between the primary domain and the trusted domain failed.

1789

The trust relationship between this workstation and the primary domain failed.

1790

The network logon failed.

1791

A remote procedure call is already in progress for this thread.

1792

An attempt was made to logon, but the network logon service was not started.

1793

The user's account has expired.

1794

The redirector is in use and cannot be unloaded.

1795

The specified printer driver is already installed.

1796

The specified port is unknown.

1797

The printer driver is unknown.

1798

The print processor is unknown.

1799

The specified separator file is invalid.

1800

The specified priority is invalid.

1801

The printer name is invalid.

1802

The printer already exists.

1803

The printer command is invalid.

1804

The specified datatype is invalid.

1805

The environment specified is invalid.

1806

There are no more bindings.

1807

The account used is an interdomain trust account. Use your global user account or local user account to access this server.

1808

The account used is a computer account. Use your global user account or local user account to access this server.

1809

The account used is a server trust account. Use your global user account or local user account to access this server.

1810

The name or security ID (SID) of the domain specified is inconsistent with the trust information for that domain.

1811

The server is in use and cannot be unloaded.

1812

The specified image file did not contain a resource section.

1813

The specified resource type cannot be found in the image file.

1814

The specified resource name cannot be found in the image file.

1815

The specified resource language ID cannot be found in the image file.

1816

Not enough quota is available to process this command.

1817

No interfaces have been registered.

1818

The remote procedure call was cancelled.

1819

The binding handle does not contain all required information.

1820

A communications failure occurred during a remote procedure call.

1821

The requested authentication level is not supported.

1822

No principal name registered.

1823

The error specified is not a valid Windows RPC error code.

1824

A UUID that is valid only on this computer has been allocated.

1825

A security package specific error occurred.

1826

Thread is not canceled.

1827

Invalid operation on the encoding/decoding handle.

1828

Incompatible version of the serializing package.

1829

Incompatible version of the RPC stub.

1830

The RPC pipe object is invalid or corrupted.

1831

An invalid operation was attempted on an RPC pipe object.

1832

Unsupported RPC pipe version.

1898

The group member was not found.

1899

The endpoint mapper database entry could not be created.

1900

The object universal unique identifier (UUID) is the nil UUID.

1901

The specified time is invalid.

1902

The specified form name is invalid.

1903

The specified form size is invalid.

1904

The specified printer handle is already being waited on

1905

The specified printer has been deleted.

1906

The state of the printer is invalid.

1907

The user's password must be changed before logging on the first time.

1908

Could not find the domain controller for this domain.

1909

The referenced account is currently locked out and may not be logged on to.

1910

The object exporter specified was not found.

1911

The object specified was not found.

1912

The object resolver set specified was not found.

1913

Some data remains to be sent in the request buffer.

1914

Invalid asynchronous remote procedure call handle.

1915

Invalid asynchronous RPC call handle for this operation.

1916

The RPC pipe object has already been closed.

1917

The RPC call completed before all pipes were processed.

1918

No more data is available from the RPC pipe.

1919

No site name is available for this machine.

1920

The file cannot be accessed by the system.

1921

The name of the file cannot be resolved by the system.

1922

The entry is not of the expected type.

1923

Not all object UUIDs could be exported to the specified entry.

1924

Interface could not be exported to the specified entry.

1925

The specified profile entry could not be added.

1926

The specified profile element could not be added.

1927

The specified profile element could not be removed.

1928

The group element could not be added.

1929

The group element could not be removed.

1930

The printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.

1931

The context has expired and can no longer be used.

2000

The pixel format is invalid.

2001

The specified driver is invalid.

2002

The window style or class attribute is invalid for this operation.

2003

The requested metafile operation is not supported.

2004

The requested transformation operation is not supported.

2005

The requested clipping operation is not supported.

2010

The specified color management module is invalid.

2011

The specified color profile is invalid.

2012

The specified tag was not found.

2013

A required tag is not present.

2014

The specified tag is already present.

2015

The specified color profile is not associated with any device.

2016

The specified color profile was not found.

2017

The specified color space is invalid.

2018

Image Color Management is not enabled.

2019

There was an error while deleting the color transform.

2020

The specified color transform is invalid.

2021

The specified transform does not match the bitmap's color space.

2022

The specified named color index is not present in the profile.

2108

The network connection was made successfully, but the user had to be prompted for a password other than the one originally specified.

2109

The network connection was made successfully using default credentials.

2202

The specified username is invalid.

2250

This network connection does not exist.

2401

This network connection has files open or requests pending.

2402

Active connections still exist.

2404

The device is in use by an active process and cannot be disconnected.

3000

The specified print monitor is unknown.

3001

The specified printer driver is currently in use.

3002

The spool file was not found.

3003

A StartDocPrinter call was not issued.

3004

An AddJob call was not issued.

3005

The specified print processor has already been installed.

3006

The specified print monitor has already been installed.

3007

The specified print monitor does not have the required functions.

3008

The specified print monitor is currently in use.

3009

The requested operation is not allowed when there are jobs queued to the printer.

3010

The requested operation is successful. Changes will not be effective until the system is rebooted.

3011

The requested operation is successful. Changes will not be effective until the service is restarted.

3012

No printers were found.

3013

The printer driver is known to be unreliable.

3014

The printer driver is known to harm the system.

4000

WINS encountered an error while processing the command.

4001

The local WINS cannot be deleted.

4002

The importation from the file failed.

4003

The backup failed. Was a full backup done before?

4004

The backup failed. Check the directory to which you are backing the database.

4005

The name does not exist in the WINS database.

4006

Replication with a nonconfigured partner is not allowed.

4100

The DHCP client has obtained an IP address that is already in use on the network. The local interface will be disabled until the DHCP client can obtain a new address.

4200

The GUID passed was not recognized as valid by a WMI data provider.

4201

The instance name passed was not recognized as valid by a WMI data provider.

4202

The data item ID passed was not recognized as valid by a WMI data provider.

4203

The WMI request could not be completed and should be retried.

4204

The WMI data provider could not be located.

4205

The WMI data provider references an instance set that has not been registered.

4206

The WMI data block or event notification has already been enabled.

4207

The WMI data block is no longer available.

4208

The WMI data service is not available.

4209

The WMI data provider failed to carry out the request.

4210

The WMI MOF information is not valid.

4211

The WMI registration information is not valid.

4212

The WMI data block or event notification has already been disabled.

4213

The WMI data item or data block is read only.

4214

The WMI data item or data block could not be changed.

4300

The media identifier does not represent a valid medium.

4301

The library identifier does not represent a valid library.

4302

The media pool identifier does not represent a valid media pool.

4303

The drive and medium are not compatible or exist in different libraries.

4304

The medium currently exists in an offline library and must be online to perform this operation.

4305

The operation cannot be performed on an offline library.

4306

The library, drive, or media pool is empty.

4307

The library, drive, or media pool must be empty to perform this operation.

4308

No media is currently available in this media pool or library.

4309

A resource required for this operation is disabled.

4310

The media identifier does not represent a valid cleaner.

4311

The drive cannot be cleaned or does not support cleaning.

4312

The object identifier does not represent a valid object.

4313

Unable to read from or write to the database.

4314

The database is full.

4315

The medium is not compatible with the device or media pool.

4316

The resource required for this operation does not exist.

4317

The operation identifier is not valid.

4318

The media is not mounted or ready for use.

4319

The device is not ready for use.

4320

The operator or administrator has refused the request.

4321

The drive identifier does not represent a valid drive.

4322

Library is full. No slot is available for use.

4323

The transport cannot access the medium.

4324

Unable to load the medium into the drive.

4325

Unable to retrieve status about the drive.

4326

Unable to retrieve status about the slot.

4327

Unable to retrieve status about the transport.

4328

Cannot use the transport because it is already in use.

4329

Unable to open or close the inject/eject port.

4330

Unable to eject the media because it is in a drive.

4331

A cleaner slot is already reserved.

4332

A cleaner slot is not reserved.

4333

The cleaner cartridge has performed the maximum number of drive cleanings.

4334

Unexpected on-medium identifier.

4335

The last remaining item in this group or resource cannot be deleted.

4336

The message provided exceeds the maximum size allowed for this parameter.

4337

The volume contains system or paging files.

4338

The media type cannot be removed from this library since at least one drive in the library reports it can support this media type.

4339

This offline media cannot be mounted on this system since no enabled drives are present which can be used.

4340

A cleaner cartridge is present in the tape library.

4350

The remote storage service was not able to recall the file.

4351

The remote storage service is not operational at this time.

4352

The remote storage service encountered a media error.

4390

The file or directory is not a reparse point.

4391

The reparse point attribute cannot be set because it conflicts with an existing attribute.

4392

The data present in the reparse point buffer is invalid.

4393

The tag present in the reparse point buffer is invalid.

4394

There is a mismatch between the tag specified in the request and the tag present in the reparse point.

4500

Single Instance Storage is not available on this volume.

5001

The cluster resource cannot be moved to another group because other resources are dependent on it.

5002

The cluster resource dependency cannot be found.

5003

The cluster resource cannot be made dependent on the specified resource because it is already dependent.

5004

The cluster resource is not online.

5005

A cluster node is not available for this operation.

5006

The cluster resource is not available.

5007

The cluster resource could not be found.

5008

The cluster is being shut down.

5009

A cluster node cannot be evicted from the cluster unless the node is down.

5010

The object already exists.

5011

The object is already in the list.

5012

The cluster group is not available for any new requests.

5013

The cluster group could not be found.

5014

The operation could not be completed because the cluster group is not online.

5015

The cluster node is not the owner of the resource.

5016

The cluster node is not the owner of the group.

5017

The cluster resource could not be created in the specified resource monitor.

5018

The cluster resource could not be brought online by the resource monitor.

5019

The operation could not be completed because the cluster resource is online.

5020

The cluster resource could not be deleted or brought offline because it is the quorum resource.

5021

The cluster could not make the specified resource a quorum resource because it is not capable of being a quorum resource.

5022

The cluster software is shutting down.

5023

The group or resource is not in the correct state to perform the requested operation.

5024

The properties were stored but not all changes will take effect until the next time the resource is brought online.

5025

The cluster could not make the specified resource a quorum resource because it does not belong to a shared storage class.

5026

The cluster resource could not be deleted since it is a core resource.

5027

The quorum resource failed to come online.

5028

The quorum log could not be created or mounted successfully.

5029

The cluster log is corrupt.

5030

The record could not be written to the cluster log since it exceeds the maximum size.

5031

The cluster log exceeds its maximum size.

5032

No checkpoint record was found in the cluster log.

5033

The minimum required disk space needed for logging is not available.

5034

The cluster node failed to take control of the quorum resource because the resource is owned by another active node.

5035

A cluster network is not available for this operation.

5036

A cluster node is not available for this operation.

5037

All cluster nodes must be running to perform this operation.

5038

A cluster resource failed.

5039

The cluster node is not valid.

5040

The cluster node already exists.

5041

A node is in the process of joining the cluster.

5042

The cluster node was not found.

5043

The cluster local node information was not found.

5044

The cluster network already exists.

5045

The cluster network was not found.

5046

The cluster network interface already exists.

5047

The cluster network interface was not found.

5048

The cluster request is not valid for this object.

5049

The cluster network provider is not valid.

5050

The cluster node is down.

5051

The cluster node is not reachable.

5052

The cluster node is not a member of the cluster.

5053

A cluster join operation is not in progress.

5054

The cluster network is not valid.

5056

The cluster node is up.

5057

The cluster IP address is already in use.

5058

The cluster node is not paused.

5059

No cluster security context is available.

5060

The cluster network is not configured for internal cluster communication.

5061

The cluster node is already up.

5062

The cluster node is already down.

5063

The cluster network is already online.

5064

The cluster network is already offline.

5065

The cluster node is already a member of the cluster.

5066

The cluster network is the only one configured for internal cluster communication between two or more active cluster nodes. The internal communication capability cannot be removed from the network.

5067

One or more cluster resources depend on the network to provide service to clients. The client access capability cannot be removed from the network.

5068

This operation cannot be performed on the cluster resource as it the quorum resource. You may not bring the quorum resource offline or modify its possible owners list.

5069

The cluster quorum resource is not allowed to have any dependencies.

5070

The cluster node is paused.

5071

The cluster resource cannot be brought online. The owner node cannot run this resource.

5072

The cluster node is not ready to perform the requested operation.

5073

The cluster node is shutting down.

5074

The cluster join operation was aborted.

5075

The cluster join operation failed due to incompatible software versions between the joining node and its sponsor.

5076

This resource cannot be created because the cluster has reached the limit on the number of resources it can monitor.

5077

The system configuration changed during the cluster join or form operation. The join or form operation was aborted.

5078

The specified resource type was not found.

5079

The specified node does not support a resource of this type. This may be due to version inconsistencies or due to the absence of the resource DLL on this node.

5080

The specified resource name is supported by this resource DLL. This may be due to a bad (or changed) name supplied to the resource DLL.

5081

No authentication package could be registered with the RPC server.

5082

You cannot bring the group online because the owner of the group is not in the preferred list for the group. To change the owner node for the group, move the group.

5083

The join operation failed because the cluster database sequence number has changed or is incompatible with the locker node. This may happen during a join operation if the cluster database was changing during the join.

5084

The resource monitor will not allow the fail operation to be performed while the resource is in its current state. This may happen if the resource is in a pending state.

5085

A non locker code got a request to reserve the lock for making global updates.

5086

The quorum disk could not be located by the cluster service.

5087

The backup up cluster database is possibly corrupt.

5088

A DFS root already exists in this cluster node.

5089

An attempt to modify a resource property failed because it conflicts with another existing property.

5890

An operation was attempted that is incompatible with the current membership state of the node.

5891

The quorum resource does not contain the quorum log.

5892

The membership engine requested shutdown of the cluster service on this node.

5893

The join operation failed because the cluster instance ID of the joining node does not match the cluster instance ID of the sponsor node.

5894

A matching network for the specified IP address could not be found. Please also specify a subnet mask and a cluster network.

5895

The actual data type of the property did not match the expected data type of the property.

5896

The cluster node was evicted from the cluster successfully, but the node was not cleaned up. Extended status information explaining why the node was not cleaned up is available.

5897

Two or more parameter values specified for a resource's properties are in conflict.

5898

This computer cannot be made a member of a cluster.

5899

This computer cannot be made a member of a cluster because it does not have the correct version of Windows installed.

5900

A cluster cannot be created with the specified cluster name because that cluster name is already in use. Specify a different name for the cluster.

6000

The specified file could not be encrypted.

6001

The specified file could not be decrypted.

6002

The specified file is encrypted and the user does not have the ability to decrypt it.

6003

There is no valid encryption recovery policy configured for this system.

6004

The required encryption driver is not loaded for this system.

6005

The file was encrypted with a different encryption driver than is currently loaded.

6006

There are no EFS keys defined for the user.

6007

The specified file is not encrypted.

6008

The specified file is not in the defined EFS export format.

6009

The specified file is read only.

6010

The directory has been disabled for encryption.

6011

The server is not trusted for remote encryption operation.

6012

Recovery policy configured for this system contains invalid recovery certificate.

6013

The encryption algorithm used on the source file needs a bigger key buffer than the one on the destination file.

6014

The disk partition does not support file encryption.

6015

This machine is disabled for file encryption.

6016

A newer system is required to decrypt this encrypted file.

6118

The list of servers for this workgroup is not currently available.

6200

The Task Scheduler service must be configured to run in the System account to function properly. Individual tasks may be configured to run in other accounts.

7001

The specified session name is invalid.

7002

The specified protocol driver is invalid.

7003

The specified protocol driver was not found in the system path.

7004

The specified terminal connection driver was not found in the system path.

7005

A registry key for event logging could not be created for this session.

7006

A service with the same name already exists on the system.

7007

A close operation is pending on the session.

7008

There are no free output buffers available.

7009

The MODEM.INF file was not found.

7010

The modem name was not found in MODEM.INF.

7011

The modem did not accept the command sent to it. Verify that the configured modem name matches the attached modem.

7012

The modem did not respond to the command sent to it. Verify that the modem is properly cabled and powered on.

7013

Carrier detect has failed or carrier has been dropped due to disconnect.

7014

Dial tone not detected within the required time. Verify that the phone cable is properly attached and functional.

7015

Busy signal detected at remote site on callback.

7016

Voice detected at remote site on callback.

7017

Transport driver error

7022

The specified session cannot be found.

7023

The specified session name is already in use.

7024

The requested operation cannot be completed because the terminal connection is currently busy processing a connect, disconnect, reset, or delete operation.

7025

An attempt has been made to connect to a session whose video mode is not supported by the current client.

7035

The application attempted to enable DOS graphics mode. DOS graphics mode is not supported.

7037

Your interactive logon privilege has been disabled. Please contact your administrator.

7038

The requested operation can be performed only on the system console. This is most often the result of a driver or system DLL requiring direct console access.

7040

The client failed to respond to the server connect message.

7041

Disconnecting the console session is not supported.

7042

Reconnecting a disconnected session to the console is not supported.

7044

The request to control another session remotely was denied.

7045

The requested session access is denied.

7049

The specified terminal connection driver is invalid.

7050

The requested session cannot be controlled remotely. This may be because the session is disconnected or does not currently have a user logged on.

7051

The requested session is not configured to allow remote control.

7052

Your request to connect to this Terminal Server has been rejected. Your Terminal Server client license number is currently being used by another user. Please call your system administrator to obtain a unique license number.

7053

Your request to connect to this Terminal Server has been rejected. Your Terminal Server client license number has not been entered for this copy of the Terminal Server client. Please contact your system administrator.

7054

The system has reached its licensed logon limit. Please try again later.

7055

The client you are using is not licensed to use this system. Your logon request is denied.

7056

The system license has expired. Your logon request is denied.

7057

Remote control could not be terminated because the specified session is not currently being remotely controlled.

7058

The remote control of the console was terminated because the display mode was changed. Changing the display mode in a remote control session is not supported.

8001

The file replication service API was called incorrectly.

8002

The file replication service cannot be started.

8003

The file replication service cannot be stopped.

8004

The file replication service API terminated the request. The event log may have more information.

8005

The file replication service terminated the request. The event log may have more information.

8006

The file replication service cannot be contacted. The event log may have more information.

8007

The file replication service cannot satisfy the request because the user has insufficient privileges. The event log may have more information.

8008

The file replication service cannot satisfy the request because authenticated RPC is not available. The event log may have more information.

8009

The file replication service cannot satisfy the request because the user has insufficient privileges on the domain controller. The event log may have more information.

8010

The file replication service cannot satisfy the request because authenticated RPC is not available on the domain controller. The event log may have more information.

8011

The file replication service cannot communicate with the file replication service on the domain controller. The event log may have more information.

8012

The file replication service on the domain controller cannot communicate with the file replication service on this computer. The event log may have more information.

8013

The file replication service cannot populate the system volume because of an internal error. The event log may have more information.

8014

The file replication service cannot populate the system volume because of an internal timeout. The event log may have more information.

8015

The file replication service cannot process the request. The system volume is busy with a previous request.

8016

The file replication service cannot stop replicating the system volume because of an internal error. The event log may have more information.

8017

The file replication service detected an invalid parameter.

8200

An error occurred while installing the directory service. For more information, see the event log.

8201

The directory service evaluated group memberships locally.

8202

The specified directory service attribute or value does not exist.

8203

The attribute syntax specified to the directory service is invalid.

8204

The attribute type specified to the directory service is not defined.

8205

The specified directory service attribute or value already exists.

8206

The directory service is busy.

8207

The directory service is unavailable.

8208

The directory service was unable to allocate a relative identifier.

8209

The directory service has exhausted the pool of relative identifiers.

8210

The requested operation could not be performed because the directory service is not the master for that type of operation.

8211

The directory service was unable to initialize the subsystem that allocates relative identifiers.

8212

The requested operation did not satisfy one or more constraints associated with the class of the object.

8213

The directory service can perform the requested operation only on a leaf object.

8214

The directory service cannot perform the requested operation on the RDN attribute of an object.

8215

The directory service detected an attempt to modify the object class of an object.

8216

The requested cross-domain move operation could not be performed.

8217

Unable to contact the global catalog server.

8218

The policy object is shared and can only be modified at the root.

8219

The policy object does not exist.

8220

The requested policy information is only in the directory service.

8221

A domain controller promotion is currently active.

8222

A domain controller promotion is not currently active

8224

An operations error occurred.

8225

A protocol error occurred.

8226

The time limit for this request was exceeded.

8227

The size limit for this request was exceeded.

8228

The administrative limit for this request was exceeded.

8229

The compare response was false.

8230

The compare response was true.

8231

The requested authentication method is not supported by the server.

8232

A more secure authentication method is required for this server.

8233

Inappropriate authentication.

8234

The authentication mechanism is unknown.

8235

A referral was returned from the server.

8236

The server does not support the requested critical extension.

8237

This request requires a secure connection.

8238

Inappropriate matching.

8239

A constraint violation occurred.

8240

There is no such object on the server.

8241

There is an alias problem.

8242

An invalid dn syntax has been specified.

8243

The object is a leaf object.

8244

There is an alias dereferencing problem.

8245

The server is unwilling to process the request.

8246

A loop has been detected.

8247

There is a naming violation.

8248

The result set is too large.

8249

The operation affects multiple DSAs

8250

The server is not operational.

8251

A local error has occurred.

8252

An encoding error has occurred.

8253

A decoding error has occurred.

8254

The search filter cannot be recognized.

8255

One or more parameters are illegal.

8256

The specified method is not supported.

8257

No results were returned.

8258

The specified control is not supported by the server.

8259

A referral loop was detected by the client.

8260

The preset referral limit was exceeded.

8261

The search requires a SORT control.

8262

The search results exceed the offset range specified.

8301

The root object must be the head of a naming context. The root object cannot have an instantiated parent.

8302

The add replica operation cannot be performed. The naming context must be writable in order to create the replica.

8303

A reference to an attribute that is not defined in the schema occurred.

8304

The maximum size of an object has been exceeded.

8305

An attempt was made to add an object to the directory with a name that is already in use.

8306

An attempt was made to add an object of a class that does not have an RDN defined in the schema.

8307

An attempt was made to add an object using an RDN that is not the RDN defined in the schema.

8308

None of the requested attributes were found on the objects.

8309

The user buffer is too small.

8310

The attribute specified in the operation is not present on the object.

8311

Illegal modify operation. Some aspect of the modification is not permitted.

8312

The specified object is too large.

8313

The specified instance type is not valid.

8314

The operation must be performed at a master DSA.

8315

The object class attribute must be specified.

8316

A required attribute is missing.

8317

An attempt was made to modify an object to include an attribute that is not legal for its class

8318

The specified attribute is already present on the object.

8320

The specified attribute is not present, or has no values.

8321

Multiple values were specified for an attribute that can have only one value.

8322

A value for the attribute was not in the acceptable range of values.

8323

The specified value already exists.

8324

The attribute cannot be removed because it is not present on the object.

8325

The attribute value cannot be removed because it is not present on the object.

8326

The specified root object cannot be a subref.

8327

Chaining is not permitted.

8328

Chained evaluation is not permitted.

8329

The operation could not be performed because the object's parent is either uninstantiated or deleted.

8330

Having a parent that is an alias is not permitted. Aliases are leaf objects.

8331

The object and parent must be of the same type, either both masters or both replicas.

8332

The operation cannot be performed because child objects exist. This operation can only be performed on a leaf object.

8333

Directory object not found.

8334

The aliased object is missing.

8335

The object name has bad syntax.

8336

It is not permitted for an alias to refer to another alias.

8337

The alias cannot be dereferenced.

8338

The operation is out of scope.

8339

The operation cannot continue because the object is in the process of being removed.

8340

The DSA object cannot be deleted.

8341

A directory service error has occurred.

8342

The operation can only be performed on an internal master DSA object.

8343

The object must be of class DSA.

8344

Insufficient access rights to perform the operation.

8345

The object cannot be added because the parent is not on the list of possible superiors.

8346

Access to the attribute is not permitted because the attribute is owned by the Security Accounts Manager (SAM).

8347

The name has too many parts.

8348

The name is too long.

8349

The name value is too long.

8350

The directory service encountered an error parsing a name.

8351

The directory service cannot get the attribute type for a name.

8352

The name does not identify an object; the name identifies a phantom.

8353

The security descriptor is too short.

8354

The security descriptor is invalid.

8355

Failed to create name for deleted object.

8356

The parent of a new subref must exist.

8357

The object must be a naming context.

8358

It is not permitted to add an attribute which is owned by the system.

8359

The class of the object must be structural; you cannot instantiate an abstract class.

8360

The schema object could not be found.

8361

A local object with this GUID (dead or alive) already exists.

8362

The operation cannot be performed on a back link.

8363

The cross reference for the specified naming context could not be found.

8364

The operation could not be performed because the directory service is shutting down.

8365

The directory service request is invalid.

8366

The role owner attribute could not be read.

8367

The requested FSMO operation failed. The current FSMO holder could not be reached.

8368

Modification of a DN across a naming context is not permitted.

8369

The attribute cannot be modified because it is owned by the system.

8370

Only the replicator can perform this function.

8371

The specified class is not defined.

8372

The specified class is not a subclass.

8373

The name reference is invalid.

8374

A cross reference already exists.

8375

It is not permitted to delete a master cross reference.

8376

Subtree notifications are only supported on NC heads.

8377

Notification filter is too complex.

8378

Schema update failed: duplicate RDN.

8379

Schema update failed: duplicate OID

8380

Schema update failed: duplicate MAPI identifier.

8381

Schema update failed: duplicate schema-id GUID.

8382

Schema update failed: duplicate LDAP display name.

8383

Schema update failed: range-lower less than range upper

8384

Schema update failed: syntax mismatch

8385

Schema deletion failed: attribute is used in must-contain

8386

Schema deletion failed: attribute is used in may-contain

8387

Schema update failed: attribute in may-contain does not exist

8388

Schema update failed: attribute in must-contain does not exist

8389

Schema update failed: class in aux-class list does not exist or is not an auxiliary class

8390

Schema update failed: class in poss-superiors does not exist

8391

Schema update failed: class in subclassof list does not exist or does not satisfy hierarchy rules

8392

Schema update failed: Rdn-Att-Id has wrong syntax

8393

Schema deletion failed: class is used as auxiliary class

8394

Schema deletion failed: class is used as sub class

8395

Schema deletion failed: class is used as poss superior

8396

Schema update failed in recalculating validation cache.

8397

The tree deletion is not finished.

8398

The requested delete operation could not be performed.

8399

Cannot read the governs class identifier for the schema record.

8400

The attribute schema has bad syntax.

8401

The attribute could not be cached.

8402

The class could not be cached.

8403

The attribute could not be removed from the cache.

8404

The class could not be removed from the cache.

8405

The distinguished name attribute could not be read.

8406

A required subref is missing.

8407

The instance type attribute could not be retrieved.

8408

An internal error has occurred.

8409

A database error has occurred.

8410

The attribute GOVERNSID is missing.

8411

An expected attribute is missing.

8412

The specified naming context is missing a cross reference.

8413

A security checking error has occurred.

8414

The schema is not loaded.

8415

Schema allocation failed. Please check if the machine is running low on memory.

8416

Failed to obtain the required syntax for the attribute schema.

8417

The global catalog verification failed. The global catalog is not available or does not support the operation. Some part of the directory is currently not available.

8418

The replication operation failed because of a schema mismatch between the servers involved.

8419

The DSA object could not be found.

8420

The naming context could not be found.

8421

The naming context could not be found in the cache.

8422

The child object could not be retrieved.

8423

The modification was not permitted for security reasons.

8424

The operation cannot replace the hidden record.

8425

The hierarchy file is invalid.

8426

The attempt to build the hierarchy table failed.

8427

The directory configuration parameter is missing from the registry.

8428

The attempt to count the address book indices failed.

8429

The allocation of the hierarchy table failed.

8430

The directory service encountered an internal failure.

8431

The directory service encountered an unknown failure.

8432

A root object requires a class of 'top'.

8433

This directory server is shutting down, and cannot take ownership of new floating single-master operation roles.

8434

The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles.

8435

The directory service was unable to transfer ownership of one or more floating single-master operation roles to other servers.

8436

The replication operation failed.

8437

An invalid parameter was specified for this replication operation.

8438

The directory service is too busy to complete the replication operation at this time.

8439

The distinguished name specified for this replication operation is invalid.

8440

The naming context specified for this replication operation is invalid.

8441

The distinguished name specified for this replication operation already exists.

8442

The replication system encountered an internal error.

8443

The replication operation encountered a database inconsistency.

8444

The server specified for this replication operation could not be contacted.

8445

The replication operation encountered an object with an invalid instance type.

8446

The replication operation failed to allocate memory.

8447

The replication operation encountered an error with the mail system.

8448

The replication reference information for the target server already exists.

8449

The replication reference information for the target server does not exist.

8450

The naming context cannot be removed because it is replicated to another server.

8451

The replication operation encountered a database error.

8452

The naming context is in the process of being removed or is not replicated from the specified server.

8453

Replication access was denied.

8454

The requested operation is not supported by this version of the directory service.

8455

The replication remote procedure call was cancelled.

8456

The source server is currently rejecting replication requests.

8457

The destination server is currently rejecting replication requests.

8458

The replication operation failed due to a collision of object names.

8459

The replication source has been reinstalled.

8460

The replication operation failed because a required parent object is missing.

8461

The replication operation was preempted.

8462

The replication synchronization attempt was abandoned because of a lack of updates.

8463

The replication operation was terminated because the system is shutting down.

8464

The replication synchronization attempt failed as the destination partial attribute set is not a subset of source partial attribute set.

8465

The replication synchronization attempt failed because a master replica attempted to sync from a partial replica.

8466

The server specified for this replication operation was contacted, but that server was unable to contact an additional server needed to complete the operation.

8467

The version of the Active Directory schema of the source forest is not compatible with the version of Active Directory on this computer. You must upgrade the operating system on a domain controller in the source forest before this computer can be added as a domain controller to that forest.

8468

Schema update failed: An attribute with the same link identifier already exists.

8469

Name translation: Generic processing error.

8470

Name translation: Could not find the name or insufficient right to see name.

8471

Name translation: Input name mapped to more than one output name.

8472

Name translation: Input name found, but not the associated output format.

8473

Name translation: Unable to resolve completely, only the domain was found.

8474

Name translation: Unable to perform purely syntactical mapping at the client without going out to the wire.

8475

Modification of a constructed att is not allowed.

8476

The OM-Object-Class specified is incorrect for an attribute with the specified syntax.

8477

The replication request has been posted; waiting for reply.

8478

The requested operation requires a directory service, and none was available.

8479

The LDAP display name of the class or attribute contains non-ASCII characters.

8480

The requested search operation is only supported for base searches.

8481

The search failed to retrieve attributes from the database.

8482

The schema update operation tried to add a backward link attribute that has no corresponding forward link.

8483

Source and destination of a cross domain move do not agree on the object's epoch number. Either source or destination does not have the latest version of the object.

8484

Source and destination of a cross domain move do not agree on the object's current name. Either source or destination does not have the latest version of the object.

8485

Source and destination of a cross domain move operation are identical. Caller should use local move operation instead of cross domain move operation.

8486

Source and destination for a cross domain move are not in agreement on the naming contexts in the forest. Either source or destination does not have the latest version of the Partitions container.

8487

Destination of a cross domain move is not authoritative for the destination naming context.

8488

Source and destination of a cross domain move do not agree on the identity of the source object. Either source or destination does not have the latest version of the source object.

8489

Object being moved across domains is already known to be deleted by the destination server. The source server does not have the latest version of the source object.

8490

Another operation which requires exclusive access to the PDC PSMO is already in progress.

8491

A cross domain move operation failed such that the two versions of the moved object exist - one each in the source and destination domains. The destination object needs to be removed to restore the system to a consistent state.

8492

This object may not be moved across domain boundaries either because cross domain moves for this class are disallowed, or the object has some special characteristics, eg: trust account or restricted RID, which prevent its move.

8493

Can't move objects with memberships across domain boundaries as once moved, this would violate the membership conditions of the account group. Remove the object from any account group memberships and retry.

8494

A naming context head must be the immediate child of another naming context head, not of an interior node.

8495

The directory cannot validate the proposed naming context name because it does not hold a replica of the naming context above the proposed naming context. Please ensure that the domain naming master role is held by a server that is configured as a global catalog server, and that the server is up to date with its replication partners. (Applies only to Windows 2000 Domain Naming masters)

8496

Destination domain must be in native mode.

8497

The operation cannot be performed because the server does not have an infrastructure container in the domain of interest.

8498

Cross-domain move of non-empty account groups is not allowed.

8499

Cross-domain move of non-empty resource groups is not allowed.

8500

The search flags for the attribute are invalid. The ANR bit is valid only on attributes of Unicode or Teletex strings.

8501

Tree deletions starting at an object which has an NC head as a descendant are not allowed.

8502

The directory service failed to lock a tree in preparation for a tree deletion because the tree was in use.

8503

The directory service failed to identify the list of objects to delete while attempting a tree deletion.

8504

Security Accounts Manager initialization failed because of the following error: %1. Error Status: 0x%2. Click OK to shut down the system and reboot into Directory Services Restore Mode. Check the event log for detailed information.

8505

Only an administrator can modify the membership list of an administrative group.

8506

Cannot change the primary group ID of a domain controller account.

8507

An attempt is made to modify the base schema.

8508

Adding a new mandatory attribute to an existing class, deleting a mandatory attribute from an existing class, or adding an optional attribute to the special class Top that is not a backlink attribute (directly or through inheritance, for example, by adding or deleting an auxiliary class) is not allowed.

8509

Schema update is not allowed on this DC because the DC is not the schema FSMO Role Owner.

8510

An object of this class cannot be created under the schema container. You can only create attribute-schema and class-schema objects under the schema container.

8511

The replica/child install failed to get the objectVersion attribute on the schema container on the source DC. Either the attribute is missing on the schema container or the credentials supplied do not have permission to read it.

8512

The replica/child install failed to read the objectVersion attribute in the SCHEMA section of the file schema.ini in the system32 directory.

8513

The specified group type is invalid.

8514

Cannot nest global groups in a mixed domain if the group is security-enabled.

8515

Cannot nest local groups in a mixed domain if the group is security-enabled.

8516

A global group cannot have a local group as a member.

8517

A global group cannot have a universal group as a member.

8518

A universal group cannot have a local group as a member.

8519

A global group cannot have a cross-domain member.

8520

A local group cannot have another cross-domain local group as a member.

8521

A group with primary members cannot change to a security-disabled group.

8522

The schema cache load failed to convert the string default SD on a class-schema object.

8523

Only DSAs configured to be Global Catalog servers should be allowed to hold the Domain Naming Master FSMO role. (Applies only to Windows 2000 servers)

8524

The DSA operation is unable to proceed because of a DNS lookup failure.

8525

While processing a change to the DNS Host Name for an object, the Service Principal Name values could not be kept in sync.

8526

The Security Descriptor attribute could not be read.

8527

The object requested was not found, but an object with that key was found.

8528

The syntax of the linked attributed being added is incorrect. Forward links can only have syntax 2.5.5.1, 2.5.5.7, and 2.5.5.14, and backlinks can only have syntax 2.5.5.1.

8529

Security Account Manager needs to get the boot password.

8530

Security Account Manager needs to get the boot key from floppy disk.

8531

Directory Service cannot start.

8532

Directory Services could not start.

8533

The connection between client and server requires packet privacy or better.

8534

The source domain may not be in the same forest as destination.

8535

The destination domain must be in the forest.

8536

The operation requires that destination domain auditing be enabled.

8537

The operation couldn't locate a DC for the source domain.

8538

The source object must be a group or user.

8539

The source object's SID already exists in destination forest.

8540

The source and destination object must be of the same type.

8541

Security Accounts Manager initialization failed because of the following error: %1. Error Status: 0x%2. Click OK to shut down the system and reboot into Safe Mode. Check the event log for detailed information.

8542

Schema information could not be included in the replication request.

8543

The replication operation could not be completed due to a schema incompatibility.

8544

The replication operation could not be completed due to a previous schema incompatibility.

8545

The replication update could not be applied because either the source or the destination has not yet received information regarding a recent cross-domain move operation.

8546

The requested domain could not be deleted because there exist domain controllers that still host this domain.

8547

The requested operation can be performed only on a global catalog server.

8548

A local group can only be a member of other local groups in the same domain.

8549

Foreign security principals cannot be members of universal groups.

8550

The attribute is not allowed to be replicated to the GC because of security reasons.

8551

The checkpoint with the PDC could not be taken because there are too many modifications being processed currently.

8552

The operation requires that source domain auditing be enabled.

8553

Security principal objects can only be created inside domain naming contexts.

8554

A Service Principal Name (SPN) could not be constructed because the provided hostname is not in the necessary format.

8555

A Filter was passed that uses constructed attributes.

8556

The unicodePwd attribute value must be enclosed in double quotes.

8557

Your computer could not be joined to the domain. You have exceeded the maximum number of computer accounts you are allowed to create in this domain. Contact your system administrator to have this limit reset or increased.

8558

For security reasons, the operation must be run on the destination DC.

8559

For security reasons, the source DC must be NT4SP4 or greater.

8560

Critical Directory Service System objects cannot be deleted during tree delete operations. The tree delete may have been partially performed.

8561

Directory Services could not start because of the following error: %1. Error Status: 0x%2. Please click OK to shutdown the system. You can use the recovery console to diagnose the system further.

8562

Security Accounts Manager initialization failed because of the following error: %1. Error Status: 0x%2. Please click OK to shutdown the system. You can use the recovery console to diagnose the system further.

8563

This version of Windows is too old to support the current directory forest behavior. You must upgrade the operating system on this server before it can become a domain controller in this forest.

8564

This version of Windows is too old to support the current domain behavior. You must upgrade the operating system on this server before it can become a domain controller in this domain.

8565

This version of Windows no longer supports the behavior version in use in this directory forest. You must advance the forest behavior version before this server can become a domain controller in the forest.

8566

This version of Windows no longer supports the behavior version in use in this domain. You must advance the domain behavior version before this server can become a domain controller in the domain.

8567

The version of Windows is incompatible with the behavior version of the domain or forest.

8568

The behavior version cannot be increased to the requested value because Domain Controllers still exist with versions lower than the requested value.

8569

The behavior version value cannot be increased while the domain is still in mixed domain mode. You must first change the domain to native mode before increasing the behavior version.

8570

The sort order requested is not supported.

8571

Found an object with a non unique name.

8572

The machine account was created pre-NT4. The account needs to be recreated.

8573

The database is out of version store.

8574

Unable to continue operation because multiple conflicting controls were used.

8575

Unable to find a valid security descriptor reference domain for this partition.

8576

Schema update failed: The link identifier is reserved.

8577

Schema update failed: There are no link identifiers available.

8578

An account group cannot have a universal group as a member.

8579

Rename or move operations on naming context heads or read-only objects are not allowed.

8580

Move operations on objects in the schema naming context are not allowed.

8581

A system flag has been set on the object and does not allow the object to be moved or renamed.

8582

This object is not allowed to change its grandparent container. Moves are not forbidden on this object, but are restricted to sibling containers.

8583

Unable to resolve completely, a referral to another forest is generated.

8584

The requested action is not supported on standard server.

8585

Could not access a partition of the Active Directory located on a remote server. Make sure at least one server is running for the partition in question.

8586

The directory cannot validate the proposed naming context (or partition) name because it does not hold a replica nor can it contact a replica of the naming context above the proposed naming context. Please ensure that the parent naming context is properly registered in DNS, and at least one replica of this naming context is reachable by the Domain Naming master.

8587

The thread limit for this request was exceeded.

8588

The Global catalog server is not in the closet site.

8589

The DS cannot derive a service principal name (SPN) with which to mutually authenticate the target server because the corresponding server object in the local DS database has no serverReference attribute.

8590

The Directory Service failed to enter single user mode.

8591

The Directory Service cannot parse the script because of a syntax error.

8592

The Directory Service cannot process the script because of an error.

8593

The directory service cannot perform the requested operation because the servers involved are of different replication epochs (which is usually related to a domain rename that is in progress).

8594

The directory service binding must be renegotiated due to a change in the server extensions information.

8595

Operation not allowed on a disabled cross ref.

8596

Schema update failed: No values for msDS-IntId are available.

8597

Schema update failed: Duplicate msDS-INtId. Retry the operation.

8598

Schema deletion failed: attribute is used in rDNAttID.

8599

The directory service failed to authorize the request.

8600

The Directory Service cannot process the script because it is invalid.

8601

The remote create cross reference operation failed on the Domain Naming Master FSMO. The operation's error is in the extended data.

9001

DNS server unable to interpret format.

9002

DNS server failure.

9003

DNS name does not exist.

9004

DNS request not supported by name server.

9005

DNS operation refused.

9006

DNS name that ought not exist, does exist.

9007

DNS RR set that ought not exist, does exist.

9008

DNS RR set that ought to exist, does not exist.

9009

DNS server not authoritative for zone.

9010

DNS name in update or prereq is not in zone.

9016

DNS signature failed to verify.

9017

DNS bad key.

9018

DNS signature validity expired.

9501

No records found for given DNS query.

9502

Bad DNS packet.

9503

No DNS packet.

9504

DNS error, check rcode.

9505

Unsecured DNS packet.

9551

Invalid DNS type.

9552

Invalid IP address.

9553

Invalid property.

9554

Try DNS operation again later.

9555

Record for given name and type is not unique.

9556

DNS name does not comply with RFC specifications.

9557

DNS name is a fully-qualified DNS name.

9558

DNS name is dotted (multi-label).

9559

DNS name is a single-part name.

9560

DSN name contains an invalid character.

9561

DNS name is entirely numeric.

9562

The operation requested is not permitted on a DNS root server.

9601

DNS zone does not exist.

9602

DNS zone information not available.

9603

Invalid operation for DNS zone.

9604

Invalid DNS zone configuration.

9605

DNS zone has no start of authority (SOA) record.

9606

DNS zone has no name server (NS) record.

9607

DNS zone is locked.

9608

DNS zone creation failed.

9609

DNS zone already exists.

9610

DNS automatic zone already exists.

9611

Invalid DNS zone type.

9612

Secondary DNS zone requires master IP address.

9613

DNS zone not secondary.

9614

Need secondary IP address.

9615

WINS initialization failed.

9616

Need WINS servers.

9617

NBTSTAT initialization call failed.

9618

Invalid delete of start of authority (SOA)

9619

A conditional forwarding zone already exists for that name.

9620

This zone must be configured with one or more master DNS server IP addresses.

9621

The operation cannot be performed because this zone is shutdown.

9651

Primary DNS zone requires datafile.

9652

Invalid datafile name for DNS zone.

9653

Failed to open datafile for DNS zone.

9654

Failed to write datafile for DNS zone.

9655

Failure while reading datafile for DNS zone.

9701

DNS record does not exist.

9702

DNS record format error.

9703

Node creation failure in DNS.

9704

Unknown DNS record type.

9705

DNS record timed out.

9706

Name not in DNS zone.

9707

CNAME loop detected.

9708

Node is a CNAME DNS record.

9709

A CNAME record already exists for given name.

9710

Record only at DNS zone root.

9711

DNS record already exists.

9712

Secondary DNS zone data error.

9713

Could not create DNS cache data.

9714

DNS name does not exist.

9715

Could not create pointer (PTR) record.

9716

DNS domain was undeleted.

9717

The directory service is unavailable.

9718

DNS zone already exists in the directory service.

9719

DNS server not creating or reading the boot file for the directory service integrated DNS zone.

9751

DNS AXFR (zone transfer) complete.

9752

DNS zone transfer failed.

9753

Added local WINS server.

9801

Secure update call needs to continue update request.

9851

TCP/IP network protocol not installed.

9852

No DNS servers configured for local system.

9901

The specified directory partition does not exist.

9902

The specified directory partition already exists.

9903

The DS is not enlisted in the specified directory partition.

9904

The DS is already enlisted in the specified directory partition.

10004

A blocking operation was interrupted by a call to WSACancelBlockingCall.

10009

The file handle supplied is not valid.

10013

An attempt was made to access a socket in a way forbidden by its access permissions.

10014

The system detected an invalid pointer address in attempting to use a pointer argument in a call.

10022

An invalid argument was supplied.

10024

Too many open sockets.

10035

A non-blocking socket operation could not be completed immediately.

10036

A blocking operation is currently executing.

10037

An operation was attempted on a non-blocking socket that already had an operation in progress.

10038

An operation was attempted on something that is not a socket.

10039

A required address was omitted from an operation on a socket.

10040

A message sent on a datagram socket was larger than the internal message buffer or some other network limit, or the buffer used to receive a datagram into was smaller than the datagram itself.

10041

A protocol was specified in the socket function call that does not support the semantics of the socket type requested.

10042

An unknown, invalid, or unsupported option or level was specified in a getsockopt or setsockopt call.

10043

The requested protocol has not been configured into the system, or no implementation for it exists.

10044

The support for the specified socket type does not exist in this address family.

10045

The attempted operation is not supported for the type of object referenced.

10046

The protocol family has not been configured into the system or no implementation for it exists.

10047

An address incompatible with the requested protocol was used.

10048

Only one usage of each socket address (protocol/network address/port) is normally permitted.

10049

The requested address is not valid in its context.

10050

A socket operation encountered a dead network.

10051

A socket operation was attempted to an unreachable network.

10052

The connection has been broken due to keep-alive activity detecting a failure while the operation was in progress.

10053

An established connection was aborted by the software in your host machine.

10054

An existing connection was forcibly closed by the remote host.

10055

An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full.

10056

A connect request was made on an already connected socket.

10057

A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied.

10058

A request to send or receive data was disallowed because the socket had already been shut down in that direction with a previous shutdown call.

10059

Too many references to some kernel object.

10060

A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.

10061

No connection could be made because the target machine actively refused it.

10062

Cannot translate name.

10063

Name component or name was too long.

10064

A socket operation failed because the destination host was down.

10065

A socket operation was attempted to an unreachable host.

10066

Cannot remove a directory that is not empty.

10067

A Windows Sockets implementation may have a limit on the number of applications that may use it simultaneously.

10068

Ran out of quota.

10069

Ran out of disk quota.

10070

File handle reference is no longer available.

10071

Item is not available locally.

10091

WSAStartup cannot function at this time because the underlying system it uses to provide network services is currently unavailable.

10092

The Windows Sockets version requested is not supported.

10093

Either the application has not called WSAStartup, or WSAStartup failed.

10101

Returned by WSARecv or WSARecvFrom to indicate the remote party has initiated a graceful shutdown sequence.

10102

No more results can be returned by WSALookupServiceNext.

10103

A call to WSALookupServiceEnd was made while this call was still processing. The call has been canceled.

10104

The procedure call table is invalid.

10105

The requested service provider is invalid.

10106

The requested service provider could not be loaded or initialized.

10107

A system call that should never fail has failed.

10108

No such service is known. The service cannot be found in the specified name space.

10109

The specified class was not found.

10110

No more results can be returned by WSALookupServiceNext.

10111

A call to WSALookupServiceEnd was made while this call was still processing. The call has been canceled.

10112

A database query failed because it was actively refused.

11001

No such host is known.

11002

This is usually a temporary error during hostname resolution and means that the local server did not receive a response from an authoritative server.

11003

A non-recoverable error occurred during a database lookup.

11004

The requested name is valid and was found in the database, but it does not have the correct associated data being resolved for.

11005

At least one reserve has arrived.

11006

At least one path has arrived.

11007

There are no senders.

11008

There are no receivers.

11009

Reserve has been confirmed.

11010

Error due to lack of resources.

11011

Rejected for administrative reasons - bad credentials.

11012

Unknown or conflicting style.

11013

Problem with some part of the filterspec or providerspecific buffer in general.

11014

Problem with some part of the flowspec.

11015

General QOS error.

11016

An invalid or unrecognized service type was found in the flowspec.

11017

An invalid or inconsistent flowspec was found in the QOS structure.

11018

Invalid QOS provider-specific buffer.

11019

An invalid QOS filter style was used.

11020

An invalid QOS filter type was used.

11021

An incorrect number of QOS FILTERSPECs were specified in the FLOWDESCRIPTOR.

11022

An object with an invalid ObjectLength field was specified in the QOS provider-specific buffer.

11023

An incorrect number of flow descriptors was specified in the QOS structure.

11024

An unrecognized object was found in the QOS provider-specific buffer.

11025

An invalid policy object was found in the QOS provider-specific buffer.

11026

An invalid QOS flow descriptor was found in the flow descriptor list.

11027

An invalid or inconsistent flowspec was found in the QOS provider-specific buffer.

11028

An invalid FILTERSPEC was found in the QOS provider-specific buffer.

11029

An invalid shape discard mode object was found in the QOS provider-specific buffer.

11030

An invalid shaping rate object was found in the QOS provider-specific buffer.

11031

A reserved policy element was found in the QOS provider-specific buffer.

13000

The specified quick mode policy already exists.

13001

The specified quick mode policy was not found.

13002

The specified quick mode policy is being used.

13003

The specified main mode policy already exists.

13004

The specified main mode policy was not found.

13005

The specified main mode policy is being used.

13006

The specified main mode filter already exists.

13007

The specified main mode filter was not found.

13008

The specified transport mode filter already exists.

13009

The specified transport mode filter does not exist.

13010

The specified main mode authentication list exists.

13011

The specified main mode authentication list was not found.

13012

The specified quick mode policy is being used.

13013

The specified main mode policy was not found.

13014

The specified quick mode policy was not found.

13015

The manifest file contains one or more syntax errors.

13016

The application attempted to activate a disabled activation context.

13017

The requested lookup key was not found in any active activation context.

13018

The Main Mode filter is pending deletion.

13019

The transport filter is pending deletion.

13020

The tunnel filter is pending deletion.

13021

The Main Mode policy is pending deletion.

13022

The Main Mode authentication bundle is pending deletion.

13023

The Quick Mode policy is pending deletion.

13801

IKE authentication credentials are unacceptable.

13802

IKE security attributes are unacceptable.

13803

IKE Negotiation in progress.

13804

General processing error.

13805

Negotiation timed out.

13806

IKE failed to find valid machine certificate.

13807

IKE SA deleted by peer before establishment completed.

13808

IKE SA deleted before establishment completed.

13809

Negotiation request sat in Queue too long.

13810

Negotiation request sat in Queue too long.

13811

Negotiation request sat in Queue too long.

13812

Negotiation request sat in Queue too long.

13813

No response from peer.

13814

Negotiation took too long.

13815

Negotiation took too long.

13816

Unknown error occurred.

13817

Certificate Revocation Check failed.

13818

Invalid certificate key usage.

13819

Invalid certificate type.

13820

No private key associated with machine certificate.

13822

Failure in Diffie-Helman computation.

13824

Invalid header.

13825

No policy configured.

13826

Failed to verify signature.

13827

Failed to authenticate using Kerberos.

13828

Peer's certificate did not have a public key.

13829

Error processing error payload.

13830

Error processing SA payload.

13831

Error processing Proposal payload.

13832

Error processing Transform payload.

13833

Error processing KE payload.

13834

Error processing ID payload.

13835

Error processing Cert payload.

13836

Error processing Certificate Request payload.

13837

Error processing Hash payload.

13838

Error processing Signature payload.

13839

Error processing Nonce payload.

13840

Error processing Notify payload.

13841

Error processing Delete Payload.

13842

Error processing VendorId payload.

13843

Invalid payload received.

13844

Soft SA loaded.

13845

Soft SA torn down.

13846

Invalid cookie received..

13847

Peer failed to send valid machine certificate.

13848

Certification Revocation check of peer's certificate failed.

13849

New policy invalidated SAs formed with old policy.

13850

There is no available Main Mode IKE policy.

13851

Failed to enabled TCB privilege.

13852

Failed to load SECURITY.DLL.

13853

Failed to obtain security function table dispatch address from SSPI.

13854

Failed to query Kerberos package to obtain max token size.

13855

Failed to obtain Kerberos server credentials for ISAKMP/ERROR_IPSEC_IKE service. Kerberos authentication will not function. The most likely reason for this is lack of domain membership. This is normal if your computer is a member of a workgroup.

13856

Failed to determine SSPI principal name for ISAKMP/ERROR_IPSEC_IKE service (QueryCredentialsAttributes).

13857

Failed to obtain new SPI for the inbound SA from Ipsec driver. The most common cause for this is that the driver does not have the correct filter. Check your policy to verify the filters.

13858

Given filter is invalid.

13859

Memory allocation failed.

13860

Failed to add Security Association to IPSec Driver. The most common cause for this is if the IKE negotiation took too long to complete. If the problem persists, reduce the load on the faulting machine.

13861

Invalid policy.

13862

Invalid DOI.

13863

Invalid situation.

13864

Diffie-Hellman failure.

13865

Invalid Diffie-Hellman group.

13866

Error encrypting payload.

13867

Error decrypting payload.

13868

Policy match error.

13869

Unsupported ID.

13870

Hash verification failed.

13871

Invalid hash algorithm.

13872

Invalid hash size.

13873

Invalid encryption algorithm.

13874

Invalid authentication algorithm.

13875

Invalid certificate signature.

13876

Load failed.

13877

Deleted via RPC call.

13878

Temporary state created to perform reinit. This is not a real failure.

13879

The lifetime value received in the Responder Lifetime Notify is below the Windows 2000 configured minimum value. Please fix the policy on the peer machine.

13881

Key length in certificate is too small for configured security requirements.

13882

Max number of established MM SAs to peer exceeded.

13883

IKE received a policy that disables negotiation.

13884

ERROR_IPSEC_IKE_NEG_STATUS_END

14000

The requested section was not present in the activation context.

14001

This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem.

14002

The application binding data format is invalid.

14003

The referenced assembly is not installed on your system.

14004

The manifest file does not begin with the required tag and format information.

14005

The manifest file contains one or more syntax errors.

14006

The application attempted to activate a disabled activation context.

14007

The requested lookup key was not found in any active activation context.

14008

A component version required by the application conflicts with another component version already active.

14009

The type requested activation context section does not match the query API used.

14010

Lack of system resources has required isolated activation to be disabled for the current thread of execution.

14011

An attempt to set the process default activation context failed because the process default activation context was already set.

14012

The encoding group identifier specified is not recognized.

14013

The encoding requested is not recognized.

14014

The manifest contains a reference to an invalid URI.

14015

The application manifest contains a reference to a dependent assembly which is not installed.

14016

The manifest for an assembly used by the application has a reference to a dependent assembly which is not installed.

14017

The manifest contains an attribute for the assembly identity which is not valid.

14018

The manifest is missing the required default namespace specification on the assembly element.

14019

The manifest has a default namespace specified on the assembly element but its value is not "urn:schemas-microsoft-com:asm.v1".

14020

The private manifest probe has crossed the reparse-point-associated path.

14021

Two or more components referenced directly or indirectly by the application manifest have files by the same name.

14022

Two or more components referenced directly or indirectly by the application manifest have window classes with the same name.

14023

Two or more components referenced directly or indirectly by the application manifest have the same COM server CLSIDs.

14024

Two or more components referenced directly or indirectly by the application manifest have proxies for the same COM interface IIDs.

14025

Two or more components referenced directly or indirectly by the application manifest have the same COM type library TLBIDs.

14026

Two or more components referenced directly or indirectly by the application manifest have the same COM ProgIDs.

14027

Two or more components referenced directly or indirectly by the application manifest are different versions of the same component which is not permitted.

14028

A component's file does not match the verification information present in the component manifest.

14029

The policy manifest contains one or more syntax errors.

14030

Manifest Parse Error : A string literal was expected, but no opening quote character was found.

14031

Manifest Parse Error : Incorrect syntax was used in a comment.

14032

Manifest Parse Error : A name was started with an invalid character.

14033

Manifest Parse Error : A name contained an invalid character.

14034

Manifest Parse Error : A string literal contained an invalid character.

14035

Manifest Parse Error : Invalid syntax for an XML declaration.

14036

Manifest Parse Error : An invalid character was found in text content.

14037

Manifest Parse Error : Required white space was missing.

14038

Manifest Parse Error : The character '>' was expected.

14039

Manifest Parse Error : A semi colon character was expected.

14040

Manifest Parse Error : Unbalanced parentheses.

14041

Manifest Parse Error : Internal error.

14042

Manifest Parse Error : White space is not allowed at this location.

14043

Manifest Parse Error : End of file reached in invalid state for current encoding.

14044

Manifest Parse Error : Missing parenthesis.

14045

Manifest Parse Error : A single or double closing quote character (\' or \") is missing.

14046

Manifest Parse Error : Multiple colons are not allowed in a name.

14047

Manifest Parse Error : Invalid character for decimal digit.

14048

Manifest Parse Error : Invalid character for hexadecimal digit.

14049

Manifest Parse Error : Invalid Unicode character value for this platform.

14050

Manifest Parse Error : Expecting white space or '?'.

14051

Manifest Parse Error : End tag was not expected at this location.

14052

Manifest Parse Error : The following tags were not closed: %1.

14053

Manifest Parse Error : Duplicate attribute.

14054

Manifest Parse Error : Only one top level element is allowed in an XML document.

14055

Manifest Parse Error : Invalid at the top level of the document.

14056

Manifest Parse Error : Invalid XML declaration.

14057

Manifest Parse Error : XML document must have a top level element.

14058

Manifest Parse Error : Unexpected end of file.

14059

Manifest Parse Error : Parameter entities cannot be used inside markup declarations in an internal subset.

14060

Manifest Parse Error : Element was not closed.

14061

Manifest Parse Error : End element was missing the character '>'.

14062

Manifest Parse Error : A string literal was not closed.

14063

Manifest Parse Error : A comment was not closed.

14064

Manifest Parse Error : A declaration was not closed.

14065

Manifest Parse Error : A CDATA section was not closed.

14066

Manifest Parse Error : The namespace prefix is not allowed to start with the reserved string "xml".

14067

Manifest Parse Error : System does not support the specified encoding.

14068

Manifest Parse Error : Switch from current encoding to specified encoding not supported.

14069

Manifest Parse Error : The name 'xml' is reserved and must be lower case.

14070

Manifest Parse Error : The standalone attribute must have the value 'yes' or 'no'.

14071

Manifest Parse Error : The standalone attribute cannot be used in external entities.

14072

Manifest Parse Error : Invalid version number.

14073

Manifest Parse Error : Missing equals sign between attribute and attribute value.

14074

Assembly Protection Error: Unable to recover the specified assembly.

14075

Assembly Protection Error: The public key for an assembly was too short to be allowed.

14076

Assembly Protection Error: The catalog for an assembly is not valid, or does not match the assembly's manifest.

14077

An HRESULT could not be translated to a corresponding Win32 error code.

14078

Assembly Protection Error: The catalog for an assembly is missing.

14079

The supplied assembly identity is missing one or more attributes which must be present in this context.

14080

The supplied assembly identity has one or more attribute names that contain characters not permitted in XML names.

Cheers ... Tags: Endpoint Management (/connect/search?filters=im_vid_31:731), Client Management Suite (/connect/product/client-management-suite), Server Management Suite (/connect/product/server-management-suite), Configuring (/connect/search?filters=im_vid_4:843), Performance (/connect/search?filters=im_vid_4:923) Subscriptions (0)

(/connect/user/sidd) Sidd (/connect/user/sidd) View Profile (/connect/user/sidd)

Jump to latest comment

8 Comments (/connect/user/dominique) Dominique (/connect/user/dominique)

I was always looking for this list Thanks Dom Login (/connect/user/login?destination=articles%2Fwindows-system-error-codes-exit-codes-description) or Register (/connect/user/register?destination=articles%2Fwindows-system-error-codesexit-codes-description) to post comments. 29 Jan 2009 (/connect/articles/windows-system-error-codes-exit-codes-description#comment-14611)

(/connect/user/sdenure) SDenure (/connect/user/sdenure)

Instead of copying or printing out the list of all the error codes, you can also get it by running the command "net helpmsg xyz" where xyx is the exit code. For example, typing in net helpmsg 31 at a cmd prompt will return the message 'A device attached to the system is not functioning. I find it easier to execute the error code straight from a cmd prompt so I do not have to look for a list.

Login (/connect/user/login?destination=articles%2Fwindows-system-error-codes-exit-codes-description) or Register (/connect/user/register?destination=articles%2Fwindows-system-error-codesexit-codes-description) to post comments. 29 Jan 2009 (/connect/articles/windows-system-error-codes-exit-codes-description#comment-14651)

(/connect/user/tejas-shah) Tejas Shah (/connect/user/tejas-shah)



PARTNER

ACCREDITED

Windows command prompt gives easy reference. C:\> net helpmsg Voila Tejas

Login (/connect/user/login?destination=articles%2Fwindows-system-error-codes-exit-codes-description) or Register (/connect/user/register?destination=articles%2Fwindows-system-error-codesexit-codes-description) to post comments. 11 Apr 2009 (/connect/articles/windows-system-error-codes-exit-codes-description#comment-2283101)

(/connect/user/problem-error) problem-error (/connect/user/problem-error)

Thanks very much.

Login (/connect/user/login?destination=articles%2Fwindows-system-error-codes-exit-codes-description) or Register (/connect/user/register?destination=articles%2Fwindows-system-error-codesexit-codes-description) to post comments. 04 Sep 2009 (/connect/articles/windows-system-error-codes-exit-codes-description#comment-2945731)

(/connect/user/pascal-kotte) Pascal KOTTE (/connect/user/pascal-kotte)



PARTNER

ACCREDITED

When creating a batch or script, it is not a bad idea to exit with a code best matching the problem your report & exit in error. More easy to read this list instead of trying aleatory find the good one using "net helpmsg X"... ;-) I recommand you use it ;-) ~Pascal @ Kotte.net (http://job.kotte.net)~ Do you speak French? Et utilisez Altiris: venez nous rejoindre sur le GUASF (http://goo.gl/KrqYv)

Login (/connect/user/login?destination=articles%2Fwindows-system-error-codes-exit-codes-description) or Register (/connect/user/register?destination=articles%2Fwindows-system-error-codesexit-codes-description) to post comments. 18 Oct 2009 (/connect/articles/windows-system-error-codes-exit-codes-description#comment-3123951)

(/connect/user/ratt) RATT (/connect/user/ratt)

Well as of this morning everything was working well. I am using Symatech AntiVirus with Windows XP Pro service pack 3. For no apparent reason I cannot open the antivirus and keep getting error message Code #1706. Can anyone instruct me as to how to repair this or find the fix or patch? I need some help! Thanks.

Login (/connect/user/login?destination=articles%2Fwindows-system-error-codes-exit-codes-description) or Register (/connect/user/register?destination=articles%2Fwindows-system-error-codesexit-codes-description) to post comments. 22 Feb 2012 (/connect/articles/windows-system-error-codes-exit-codes-description#comment-6751341)

(/connect/user/brianok) brianok (/connect/user/brianok)

For Error 154 Solution is LONG PATH TOOL!!!

Login (/connect/user/login?destination=articles%2Fwindows-system-error-codes-exit-codes-description) or Register (/connect/user/register?destination=articles%2Fwindows-system-error-codesexit-codes-description) to post comments. 09 Aug 2014 (/connect/articles/windows-system-error-codes-exit-codes-description#comment-10387941)

(/connect/user/crissy) crissy (/connect/user/crissy)

I am having serious issues with this on my computer and is really

messing things up??

Login (/connect/user/login?destination=articles%2Fwindows-system-error-codes-exit-codes-description) or Register (/connect/user/register?destination=articles%2Fwindows-system-error-codesexit-codes-description) to post comments. 07 Sep 2014 (/connect/articles/windows-system-error-codes-exit-codes-description#comment-10464641)

Login (/connect/user/login?destination=articles%2Fwindows-system-error-codes-exit-codes-description) or Register (/connect/user/register? destination=articles%2Fwindows-system-error-codes-exit-codes-description) to post comments.

About Your Community A Message From Your Community Manager: A L Johnson (/connect/user/l-johnson) Welcome to the Endpoint Management Community. The Endpoint Management Community covers many different endpoint management products from Symantec and provides valuable technical information for each.

(/connect/user/l-johnson)

Please feel free to contact me via private message with any questions you may have. I look forward to hearing from you and answering any questions about the Community. Send a private message to the Community Manager (/connect/messages/new/2785391?destination=user%2F2785391) Top 5 Contributors: All Time MEMBER

REWARD POINTS

(/connect/user/joel-smith) Joel Smith (/connect/user/joel-smith)

80368

(/connect/user/ianatkin) ianatkin (/connect/user/ianatkin)

56898

(/connect/user/edt) EdT (/connect/user/edt)

32534

(/connect/user/alexhedley) AlexHedley (/connect/user/alexhedley)

24190

(/connect/user/mclemson) mclemson (/connect/user/mclemson)

19681

Top 5 Contributors: Last 30 Days MEMBER

REWARD POINTS

(/connect/user/alexhedley) AlexHedley (/connect/user/alexhedley)

1000

(/connect/user/brycenm) BrycenM (/connect/user/brycenm)

325

(/connect/user/sally5432) Sally5432 (/connect/user/sally5432)

202

(/connect/user/riai) r

(/connect/user/riai)

200

(/connect/user/joeliglesias) joel.iglesias (/connect/user/joeliglesias)

150

Trusted Advisors MEMBER

ARTICLES SOLVED

(/connect/user/angeld) AngelD (/connect/user/angeld)

0

77

(/connect/user/edt) EdT (/connect/user/edt)

12

671

(/connect/user/hightower) HighTower (/connect/user/hightower)

1

95

(/connect/user/jasoni) JasonI (/connect/user/jasoni)

8

5

(/connect/user/justin-dyb-dahl) Justin Dybedahl (/connect/user/justin-dyb-dahl)

1

38

(/connect/user/sally5432) Sally5432 (/connect/user/sally5432)

6

35

(/connect/user/africo) africo (/connect/user/africo)

35

74

(/connect/user/andykn101) andykn101 (/connect/user/andykn101)

2

271

(/connect/user/ianatkin) ianatkin (/connect/user/ianatkin)

78

175

Contact Us (/connect/contact) Privacy Policy (http://www.symantec.com/about/profile/policies/privacy.jsp) Earn Rewards (/connect/points) Rewards Terms and Conditions (/connect/blogs/symantec-connect-rewards-program-terms-and-conditions) © 2017 Symantec Corporation (http://twitter.com/symantec)

(http://www.facebook.com/Symantec)

(http://www.linkedin.com/company/symantec)

Loading...

Windows System Error Codes (exit codes) Description | Symantec

Symantec is excited to announce our NEW blog platform (http://www.symantec.com/blogs/) to ensure our customers and partners have access to trustworth...

339KB Sizes 4 Downloads 33 Views

Recommend Documents

Windows System Error Codes (exit codes) - HiTek Software
Mar 24, 2006 - 31 A device attached to the system is not functioning. 32 The .... 1022 A notify change request is being

PC Beep Codes Error Codes - Yoyok Aja
1) Character Map = charmap.exe (very useful for finding unusual characters) 2) Disk Cleanup = cleanmgr.exe 3) Clipboard

Explanation of fax error codes : Support System
Jul 30, 2014 - This means that a connection was established with the remote fax, but during the transmission of the fax

Brooktrout Error Codes - Extracomm
The following is a list of general Error Return Codes for Booktrout fax boards. Reference this with ... HNG_XMITB_INCMP_

Error Codes list for Microsoft technologies - Symantec Support
Apr 25, 2008 - 25, 0x00000019, The drive cannot locate a specific area or track on the disk. 26, 0x0000001A, The specifi

Error Codes - MSDN - Microsoft
For convenience, it's displayed below. Choose ... MSPR_E_PROXY_TIMEOUT, The proxy did not receive a timely response whil

Repairable Quickbooks Error Codes
If restarting QB and repeating the action causes the error again, it is probably damaged data. Then rebuild. C=43 also o

Mcs2000 Error Codes - WordPress.com
So the short story is I think I somewhat corrupted the codeplug in an MCS2000. RIB died as it was writing the CP, threw

Pentair Heater Error Codes - WordPress.com
I have a Sta-Rite SR200NA heater. Now when we turn the power on (heater is hard wired), the LED flashes r13 and then sto

Error correcting codes PDF - PDFStone.com
Download ebook pdf Error correcting codes ~ We have made it easy for you to find a PDF. Ebooks without any digging. And