Baseboard & Convector Heaters - Indeeco

Loading...

C90B

Baseboard & Convector Heaters

commercial & industrial electric heating and controls www.indeeco.com

800-243-8162

1

Introduction INDEECO offers commercial and industrial electric heating and control systems that set the industry standard for excellence. The company’s heating solutions reflect more than 85 years of innovation, product quality and efficient service.

cations. Whether the requirement is for architectural wall heaters, cabinet unit heaters, convector heaters or ceiling heaters, INDEECO has a product to match the application.

INDEECO’s quality is matched only by its customINDEECO’s line of Comfort Heating Products cover er service and support. With its quick-ship deliva wide range of commercial and industrial appli ery program, INDEECO provides the products you need.

*Optional factory installed disconnect switches have been sized in accordance to current UL2021 standards. *All field installed and factory installed electrical component options are listed with their maximum voltage and maximum amperage ratings. They can be used with heaters rated up to their maximum ratings.

2

www.indeeco.com

800-243-8162

Table of Contents Comparison Chart

4

Commercial Baseboard Heater BBI Series (903)

5-7

Architectural Sill-Height Convector BCI/BCSI Series (904/906)

8-10

Industrial Sill-Height Convector BII/BISI Series (905/907)

11-13

High-End Baseboard Heater BCHI Series (910)

14-16

Architectural Convector BAI/BASI Series (908/909)

17-20

Mini Draft Barrier Heater BMI Series (914)

21-23

High Watt Density Draft Barrier Heater BHI Series (916)

24-26

Architectural Cabinet Convector CAI/CASI Series (911/912)

27-30

Thermostats

31

Controllers and Accessories

32

Other Product Catalogs

33

Limited Warranty

34

Color Selection Chart

www.indeeco.com

Inside Back Cover

800-243-8162

3

Comparison Chart Baseboard and Convector Heaters

BISI BCHI

BCI

BBI

BMI CASI BHI

BASI

4

Features

Baseboard BBI

Architectural Sill-Height Convector BCI/BCSI

Industrial Sill-Height Convector BII/BISI

High-End Baseboard Heater BCHI

Architectural Convector BAI/BASI

Mini Draft Barrier BMI

High Watt Density Draft Barrier BHI

Architectural Cabinet Convector CAI/CASI

Typical Applications

Retail stores, Small offices

Commercial buildings, Public buildings

Industrial buildings, Institutions

Office building Commercial building

Banks, Offices Classrooms, Conference rooms

Entryways, Hallways, Schools

Entryways Hllways, Shopping centers

Classrooms, Conference rooms, Hallways

Wattage Range

300 to 2,500

200 to 2,500

200 to 2,500

100 to 200

800 to 4,000

300 to 1,400

375 to 4,000

1,000 to 6,000

Watt Density W/ft (W/m)

275 (900) 200 (650)

275 (900) 200 (650) 150 (490) 100 (330)

275 (900) 200 (650) 150 (490) 100 (330)

200 (650) 275 (900)

500 (1640) 375 (1250)

175 (574) 150 (490)

500 (1,640) 355 (1,165) 250 (820) 175 (575)

1,000 (3,280) 750 (2,450) 500 (1,640)

Voltages

120 - 277 (1 Ph)

120 - 277 (1 Ph)

120 - 277 (1 Ph)

120V - 480V (1 ph)

208 - 277 (1 Ph)

208 - 480 (1 Ph)

208 - 480 (1 Ph)

208 - 277 (1 Ph) 208 - 480 (3 Ph)

Element Type

Stainless steel with aluminum fins

Stainless steel with aluminum fins

Stainless steel with aluminum fins

Stainless steel with aluminum fins

Stainless steel with aluminum fins

Stainless steel with aluminum fins

Stainless steel with aluminum fins

Stainless steel with aluminum fins

Standard Construction

22-gauge steel body and front panel

18-gauge steel cabinetry with 14-gauge aluminum front cover

18-gauge steel cabinetry with 16-gauge steel front cover

20-gauge steel cabinetry, with 14-gauge aluminum cover

20-gauge steel cabinetry, 16-gauge steel front cover and extruded aluminum grille

18-gauge steel cabinetry with 14-gauge aluminum front and top covers

18-gauge steel cabinetry with 14-gauge aluminum front and top covers

20-gauge steel cabinetry with 16-gauge steel front cover

Finish

Epoxy/Polyester powder paint

Epoxy/Polyester powder paint

Epoxy/Polyester powder paint

Epoxy/Polyester powder paint

Epoxy/Polyester powder paint

Epoxy/Polyester powder paint

Epoxy/Polyester powder paint

Epoxy/Polyester powder paint

Sloped-Top Version

No

BCSI

BISI

No

BASI

No

No

CASI

Bottom Air Inlet Option

No

Yes

Yes

No

No

Standard

Standard

No

Pedestal Kit Option

No

Yes

Yes

No

Yes

Yes

Yes

Yes

Front Warm Air Outlet Option

No

No

No

No

Yes (BAI only)

No

No

Yes (CAI Only)

Custom Colors

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Agency Approvals

CSAUS

CSAUS

CSAUS

CSAUS

CSAUS

CSAUS

CSAUS

CSAUS

www.indeeco.com

800-243-8162

BBI Series

Baseboard Heater

The BBI baseboard heater is more compact than any other heater on the market, yet it provides a high level of performance and strength. The unit’s trim design enhances its appearance and rounded corners eliminate the sharp edges found on square heaters. • E asy to Install: Heaters may be mounted flush on any floor surface. Two rows of oblong mounting holes with center mark for ease of installation. No disassembly installation with single-screw built-in rear entry wire holder. • E lectric Receptacles: Units can be furnished with built-on 120 and 240-volt receptacles to provide access for other electrical appliances. • C  ontrol Options: Heaters can be controlled by a building management system with the addition of a low voltage relay. Adding a proportional control device provides precise temperature control and increased energy savings.

Applications • Offices • Retail Stores • Restrooms • Restaurants

Standard

Special Colors

Standard Construction Features Heating Elements – Stainless steel elements with aluminum fins float on high temperature nylon bushings for quiet operation.

Built-in Controls – Linear limit, automatic reset thermal cutout.

Housing – Robust 22-gauge steel body with 20-gauge front panel and welded junction box, with 4H pencil hardness epoxy/polyester powder paint finish in white or almond.

www.indeeco.com

800-243-8162

5

BBI Series

Baseboard Heater Factory Built-in Options Code

Description

D3

Disconnect Switch, 277V, Double-pole, 16 Amp

Field-Installed Options

(shipped loose for field installation into heater) Catalog Number

Description

903-243496‡

Baseboard Section 6 in. (152 mm) - 240V Splitter Box to permanently connect an air conditioner (20A switch, double-pole, double-throw)

903-243497‡

Baseboard Section 6” (152mm) - 240V Splitter Box toward a surface mount, 6-20R Receptacle (20A switch, double-pole, double-throw

903-243498‡

Baseboard Section 6” (152mm) - Surface mounted duplex 5-15R receptable, 120V, 15A

903-243499‡

Baseboard Section 6” (152mm) - Surface mounted duplex 6-20R receptable, 240V, 15A

903-243500‡

Baseboard Section 6” (152mm) - for the installation of a 24V relay (relay not included)

903-243501

Electronic Relay Kit, single-pole, coil 24V, with transformer, 15A 277 max

D1

Disconnect Switch, 600V, Three-pole, 40 Amp

M1

High Altitude Automatic Cutout

R1

24V Relay, Single-pole, 240V, 22 Amp: 277V, 19 Amp

R2

24V Relay with Transformer, 240V, 22 Amp; 277V, 19 Amp

R7

Triac Proportional Relay, 277V Max, 2500 W Max.

T1

Tamperproof Thermostat, Single-pole, 277V, 25 Amp

T2

Tamperproof Thermostat, Double-pole, 277V, 25 Amp

T3

Adjustable Thermostat, Single-pole, 277V, 17 Amp

T4

Adjustable Thermostat, Double-pole, 277V, 17 Amp

T5

Adjustable Thermostat, Single-pole, 600V, 25 Amp

T6

Adjustable Thermostat, Double-pole, 600V, 25 Amp

W1

Wireless thermostat and relay module for heaters, factory installed at left end

903-243502

Electronic Relay Kit, single-pole, coil 24V, without transformer, 15A 277 max

W2

Wireless thermostat and relay module for heaters, factory installed at right end

903-243503

Relay Kit 24V with transformer, 120V, 25 Amp (2-wire only)

W3

Wireless relay module for heater, factory installed at left end

903-243504

Relay Kit 24V with Transformer, 208V, 22 Amp

Wireless relay module for heaters, factory installed at right end

903-243505

Relay Kit 24V with Transformer, 240V, 22 Amp

903-243506

Relay Kit 24V with Transformer, 277V, 18 Amp

903-243507

Relay Kit 24V without Transformer, 120V - 240V, 22 Amp, 277, 18 Amps

903-243509‡

Thermostat Kit, Adjustable, Double-pole, 277V, 25 Amp with off position

903-243510‡

Thermostat Kit, Adjustable, Single-pole, 277V, 25 Amp

903-243511‡

Thermostat Kit, Tamperproof, Double-pole, 277V, 25 Amp with off position

903-243512‡

Thermostat Kit, Tamperproof, Single-pole, 277V, 25 Amp

903-243513‡

Touch Up Brush Paint (1/2 oz)

903-243515‡

Universal Corners (inside and outside)

W4

Remote Room Thermostat – See page 31.

Standard colors - Add W for white finish or A for almond finish to the end of part number. Special or custom colors - See inside back cover for color codes to be added to end of part number.

6

www.indeeco.com

800-243-8162

BBI Series

Baseboard Heater Heater Listing

How to order: Heater Code with color code + Options (example 903U00750BW-T5) Standard Watt Density Models 275 W/ft. (900 W/m) Heater Code

Length In. (mm)

Watts

120V (1 Ph)

22.75 (577)

300

27.75 (702)

Watts at Amps 240/208V

Amps

208V (1 Ph)

Amps

277V (1 Ph)

903U00300B‡

2.5

903U00300C‡

1.4



1.1

500

903U00500B‡

4.2

903U00500C‡

2.4

903U00500N‡

37.75 (956)

750

903U00750B‡

6.3

903U00750C‡

3.6

48 (1217)

1000

903U01000B‡

8.3

903U01000C‡

60 (1524)

1250

903U01250B‡

10.4

72 (1829)

1500

903U01500B‡

75.5 (1916)

1750

96 (2439)

Heater Code

Weight Lbs (kg)

277/240V (1 Ph)

Amps

300/225

903U00300V‡

1.3/1.1

4.5 (2.0)

1.8

500/375

903U00500V‡

2.1/1.8

5.4 (2.4)

903U00750N‡

2.7

750/563

903U00750V‡

3.1/2.7

7.0 (3.2)

4.8

903U01000N‡

3.6

1000/750

903U01000V‡

4.2/3.6

8.7 (3.9)

903U01250C‡

6.0

903U01250N‡

4.5

1250/938

903U01250V‡

5.2/4.5

10.7 (4.9)

12.5

903U01500C‡

7.2

903U01500N‡

5.4

1500/1125

903U01500V‡

6.3/5.4

12.7 (5.7)





903U01750C‡

8.4

903U01750N‡

6.3

1750/1313

903U01750V‡

7.3/6.3

13.2 (6.0)

2000





903U02000C‡

9.6

903U02000N‡

7.2

2000/1500

903U02000V‡

8.3/7.2

16.6 (7.5)

93 (2364)

*2250





903U02250C‡

10.8

903U02250N‡

8.1 *2250/1688

903U02250V‡

9.4/8.1

16.2 (7.3)

102.25 (2596)

*2500





903U02500C‡

12.0

903U02500N‡

9.0 *2500/1875

903U02500V‡

10.4/9.0

17.8 (8.0)

Other single-phase voltages available, consult factory. ‡Standard colors - Add W for white finish or A for almond finish to the catalog number when ‡ is indicated. Special or custom colors - See inside back cover for color codes to be added to the catalog number where ‡ is indicated. (*) These items must be ordered in pairs to reduce shipping damage.

www.indeeco.com

800-243-8162

7

BCI/BCSI Series

Architectural Sill-Height Convector Architectural Sloped Top Sill-Height Convector

BCI

BCSI

Applications • Air, Rail or Bus Terminals

• Hallways

• Auditoriums

• Lobbies

• Corridors

• Offices

• Entryways • Foyers Standard

Special Colors

The BCI/BCSI architectural sill-height convector (also known as draft barriers) are designed to fit under large windows to prevent cold down drafts. These heaters can provide total or supplemental heating for a variety of applications. • Installation Options: Units may be mounted to the wall flush on the floor or on pedestals. Custom lengths, blank sections and inside or outside corners are available for wall-to-wall installations. Units can be ordered with Option “S” for smooth painted finish when the back of the heater is visible. • A  dded Safety: The sloped-top of the BCSI prevents objects from being set on top of the heater, which can restrict airflow and cause overheating. • C  hoice of Colors: Heaters can be matched to any décor. White or almond is standard and a wide range of optional colors and custom finishes including anodized aluminum are available.

Standard Construction Features Heating Elements – Stainless steel elements with aluminum fins float on high temperature nylon bushings for quiet operation. Housing – Cabinet is constructed of 18-gauge steel with a 14-gauge aluminum front cover. The unit has an epoxy/polyester powder paint finish in white or almond. End caps are provided on all units. Inlet/Outlet Grilles – The fresh air inlet grille is located on the front of the unit. The outlet grille has openings less than 0.25 inches to discourage tampering with the heating element (pencil-proof).

8

www.indeeco.com

Built-in Controls – Linear limit, automatic reset thermal cutout. Electrical Connection – Each baseboard heater has a junction box located on both ends and a built-in full length wireway. Installation Requirements – Field or factory-installed low voltage relay and thermostat kits fit into the right-hand junction box only. Heaters 200 watt/ft or greater are not designed for residential use in the United States.

800-243-8162

BCI/BCSI Series

Architectural Sill-Height Convector Architectural Sloped Top Sill-Height Convector Field-Installed Options

Factory Built-in Options Code

(shipped loose for field installation into heater) Catalog Number

Description

A

Bottom Air Inlet

D3

Disconnect Switch, 277V, Double-pole, 16 Amp

L

906-124585(1) 906-124586(1) 906-124587 906-169806 906-124588(1)

Custom Length

M1

High Altitude Automatic Cutout

R1

24V Relay, Single-pole, 240V, 22 Amp; 277V, 19 Amp

R2

24V Relay with Transformer, 240V, 22 Amp; 277V, 19 Amp

R6

Pneumatic Relay, 480V, 20 Amp

R7

Triac Proportional Relay, 277V Max., 2500W Max.

906-124589(1)

S

Smooth painted finish on heater back

T1

Tamperproof Thermostat, Single-pole, 277V, 25 Amp

T2

Tamperproof Thermostat, Double-pole, 277V, 25 Amp; with off position

T5

Adjustable Thermostat, Single-pole, 277V, 25 Amp

T6

Adjustable Thermostat, Double-pole, 277V, 25 Amp; with off position

906-124590 906-124591 906-124592 906-124593 906-124594 906B-XXX(1) 906-224751 906-224752 906-224753 906-224754

Remote Room Thermostat – See page 31.

Description Inside Corner Outside Corner Round Pedestal Kit, 3-5”, Qty=2 Square Pedestal Kit, 2”, Qty=2 Splice Plate 2” Long Contour Splice Plate for Code A (Bottom Air Inlet) and/or Heater with Pedestals 24V Relay Kit, 240V, 22 Amp; 277V, 19 Amp 24V Relay Kit with Transformer, 120V, 25 Amp (2-wire only) 24V Relay Kit with Transformer, 208V, 22 Amp 24V Relay Kit with Transformer, 240V, 22 Amp 24V Relay Kit with Transformer, 277V, 19 Amp Blank Section (specify length in inches-XXX) Tamperproof, Single-pole Thermostat Kit, 277V, 25 Amp Tamperproof, Double-pole Thermostat Kit, 277V, 25 Amp; with off position Single-pole Thermostat Kit, 277V, 25 Amp Double-pole Thermostat Kit, 277V, 25 Amp; with off position

(1) Change 906 prefix to 904 for BCSI. Standard colors - Add W for white finish or A for alomond finish to the end of the part number. Special or custom colors - See inside back cover for color codes to be added to the end of part number.

2-1/2"

4" K.O. 1/4"

6-1/8"

3-7/8"

1-3/8" 1-7/8"

BCI Series

1-1/8"

2-3/8"

15/16"

K.O. 7/8"

1-1/8"

7/8"

2-3/8" 2-1/2"

4"

K.O. 1/4"

7-1/2"

3-7/8"

1-3/8" 1-7/8" 15/16"

BCSI Series

2-3/8" K.O. 7/8"

1-1/8" 1-1/8"

7/8"

www.indeeco.com

2-3/8"

800-243-8162

9

BCI/BCSI Series

Architectural Sill-Height Convector Architectural Sloped Top Sill-Height Convector

BCI Model: 906U (Flat Top) BCSI Model: 904U (Sloped Top)

How to order: Model + Heater Code with color code + Options (example 906U01000BW-2632-T5) Density Length In. Watts (mm) W/Ft W/m 29 (738)

39 (992)

49.3 (1253)

58.8 (1494)

67.5 (1715)

76.9 (1952)

85.6 (2175)

94.5 (2400)

103.6 (2632)

Heater Code 120V (1 Ph)

Amps

208V (1 Ph)

Amps

Watts at Amps 240/208V

277V (1 Ph)

Amps

100

330

200

00200B‡-738

1.7

00200C‡-738

1.0





200/150 00200V‡-738 0.8/0.7

150

490

300

00300B‡-738

2.5

00300C‡-738

1.4

00300N‡-738

1.1

300/225 00300V‡-738 1.3/1.1

200

650

400

00400B‡-738

3.3

00400C‡-738

1.9

00400N‡-738

1.4

400/300 00400V‡-738 1.7/1.4

275

900

500

00500B‡

4.2

00500C‡

2.4

00500N‡

1.8

500/375

100

330

300

00300B‡-992

2.5

00300C‡-992

1.4

00300N‡-992

1.1

300/225 00300V‡-992 1.3/1.1 10.4 (4.7)

11.9 (5.4)

12.8 (5.8)

14.7 (6.6)

15.1 (6.8)

17.3 (7.9)

17.2 (7.8)

19.7 (9.0)

19.4 (8.8)

22.3 (10.1)

21.5 (9.7)

24.7 (11.2)

23.6 8.7 01800N‡-2400 6.5 1800/1350 01800V‡-2400 7.5/6.5 (10.7)

27.2 (12.3)

00500V‡

2.1/1.8

150

490

450

00450B‡-992

3.8

00450C‡-992

2.2

00450N‡-992

1.6

450/338 00450V‡-992 1.9/1.6

650

600

00600B‡-992

5.0

00600C‡-992

2.9

00600N‡-992

2.2

600/450 00600V‡-992 2.5/2.2

275 100

900 330

750 400

00750B‡ 00400B‡-1253

6.3 3.3

00750C‡ 00400C‡-1253

3.6 00750N‡ 2.7 1.9 00400N‡-1253 1.4

750/563 00750V‡ 3.1/2.7 400/300 00400V‡-1253 1.7/1.4

150

490

600

00600B‡-1253

5.0

00600C‡-1253

2.9 00600N‡-1253 2.2

600/450 00600V‡-1253 2.5/2.2

200

650

800

00800B‡-1253

6.7

00800C‡-1253

3.8 00800N‡-1253 2.9

800/600 00800V‡-1253 3.3/2.9

275

900

1000

01000B‡

8.3

01000C‡

4.8

1000/750

100

330

500

00500B‡-1494

4.2

00500C‡-1494

2.4 00500N‡-1494 1.8

150

490

750

00750B‡-1494

6.3

00750C‡-1494

3.6 00750N‡-1494 2.7

750/563 00750V‡-1494 3.1/2.7

200

650

1000 01000B‡-1494

8.3

01000C‡-1494

4.8 01000N‡-1494 3.6

1000/750 01000V‡-1494 4.2/3.6

275

900

1250

01250B‡

10.4

01250C‡

6.0

1250/938

100

330

600

00600B‡-1715

5.0

00600C‡-1715

2.9 00600N‡-1715 2.2

150

490

900

00900B‡-1715

7.5

00900C‡-1715

4.3 00900N‡-1715 3.2

900/675 00900V‡-1715 3.8/3.2

200

650

1200 01200B‡-1715

10.0

01200C‡-1715

5.8 01200N‡-1715 4.3

1200/900 01200V‡-1715 5.0/4.3

275

900

1500

01500B‡

12.5

01500C‡

100

330

700

00700B‡-1952

5.8

00700C‡-1952

3.4 00700N‡-1952 2.5

700/525 00700V‡-1952 2.9/2.5

150

490

1050 01050B‡-1952

8.8

01050C‡-1952

5.0 01050N‡-1952 3.8

1050/788 01050V‡-1952 4.3/3.8

200

650

1400 01400B‡-1952

11.7

01400C‡-1952

6.7 01400N‡-1952 5.1 1400/1050 01400V‡-1952 5.8/5.0

275 100 150

900 330 490

1750 — 800 00800B‡-2175 1200 01200B‡-2175

— 6.7 10.0

01750C‡ 00800C‡-2175 01200C‡-2175

8.4 01750N‡ 6.3 1750/1313 01750V‡ 7.3/6.3 3.8 00800N‡-2175 2.9 800/600 00800V‡-2175 3.3/2.9 5.8 01200N‡-2175 4.3 1200/900 01200V‡-2175 5.0/4.3

200

650

1600



01600C‡-2175

7.7 01600N‡-2175 5.8 1600/1200 01600V‡-2175 6.7/5.8

7.2

01000N‡

01250N‡

01500N‡

3.6

4.5

01000V‡

4.2/3.6

500/375 00500V‡-1494 2.1/1.8

01250V‡

5.2/4.5

600/450 00600V‡-1715 2.5/2.2

5.4 1500/1125

01500V‡

6.3/5.4

275

900

2000





02000C‡

100

330

900

00900B‡-2400

7.5

00900C‡-2400

4.3 00900N‡-2400 3.2

150

490

1350





01350C‡-2400

6.5 01350N‡-2400 4.9 1350/1013 01350V‡-2400 5.6/4.9

200

650

1800





01800C‡-2400

275

900

2250





02250C‡

100

330

1000 01000B‡-2632

8.3

01000C‡-2632

4.8 01000N‡-2632 3.6

150

490

1500





01500C‡-2632

7.2 01500N‡-2632 5.4 1500/1125 01500V‡-2632 6.3/5.4

200

650

2000





02000C‡-2632

9.6 02000N‡-2632 7.2 2000/1500 02000V‡-2632 8.3/7.2

200

650

2250





02250C‡-2632 10.8 02250N‡-2632 8.1 2250/1688 02250V‡-2632 9.4/8.1

275

900

2500





02500C‡

9.6

10.8

12.0

02000N‡

02250N‡

02500N‡

7.2 2000/1500

02000V‡

8.3/7.2

900/675 00900V‡-2400 3.8/3.2

8.1 2250/1688

02250V‡

9.4/8.1

1000/750 01000V‡-2632 4.2/3.6

9.0 2500/1875

‡Standard colors - Add W for white finish or A for almond finish to the end of catalog number when ‡ is indicated. Special or custom colors - See inside back cover for color codes to be added to end of catalog number.

www.indeeco.com

BCI BCSI (Flat) (Sloped) 9.1 (4.1)

200



Weight Lbs (kg)

8.0 (3.6)

Other voltages available. Consult factory.

10

Heater Code 240/208V (1 Ph)

800-243-8162

02500V‡

10.4/9.0

25.8 (11.7)

29.7 (13.5)

BII/BISI Series

Industrial Sill-Height Convector Industrial Sloped Top Sill-Height Convector

BII

BISI

Applications • Air, Rail or Bus Terminals

• Hallways

• Auditoriums

• Lobbies

• Corridors

• Offices

• Entryways • Foyers

Standard

Special Colors

The BII/BISI industrial sill-height convector (also known as draft barriers) are designed to fit under large windows to prevent cold down drafts. The heaters are ideal for heavy traffic areas with high heating requirements. • Installation Options: Units may be mounted to the wall flush on the floor or on pedestals. Custom lengths and blank sections and inside or outside corners are available for wall-to-wall installations. Units can be ordered Option “S” with smooth painted finish when the back of the heater is visible. • L ength Options: Heaters can be installed singularly in lengths from 28.8 inches to 103.4 inches or joined end to end for complete perimeter heating. • A  dded Safety: The sloped-top cabinet on the BISI prevents objects from being set on top of the heater, which can restrict airflow and cause overheating. • C  hoice of Colors: Heaters can be matched to any décor. White or almond is standard and a wide range of optional colors and custom finishes are also available.

Standard Construction Features Heating Elements – Stainless steel elements with aluminum fins float on high temperature nylon bushings for quiet operation. Housing – Cabinet is constructed of 18-gauge steel with a 16-gauge steel front cover. The unit has an epoxy/polyester powder paint finish in white or almond. End caps are provided on all units. Inlet/Outlet Grilles – The fresh air inlet grille is located on the front of the unit. The outlet grille has openings less than 0.25 inches to discourage tampering with the heating element (pencil-proof).

www.indeeco.com

Built-in Controls – Linear limit, automatic reset thermal cutout. Electrical Connection – Each baseboard heater has a junction box located on both ends and a built-in full length wireway. Installation Requirements – Field or factory-installed low voltage relay and thermostat kits fit into the right-hand junction box only. Heaters 200 watt/ft or greater are not designed for residential use in the United States.

800-243-8162

11

BII/BISI Series

Industrial Sill-Height Convector Industrial Sloped Top Sill-Height Convector Factory Built-in Options Code

Field-Installed Options

(shipped loose for field installation into heater) Catalog Number

Description

A

Bottom Air Inlet

D3

Disconnect Switch, 277V, Double-pole, 20 Amp

L

907-124597(1) 907-124598(1) 907-124599 907-169807 907-124600(1)

Custom Length

M1

High Altitude Automatic Cutout

R1

24V Relay, Single-pole, 240V, 22 Amp; 277V, 19 Amp

R2

24V Relay with Transformer, 240V, 22 Amp; 277V, 19 Amp

R6

Pneumatic Relay, 480V, 20 Amp

R7

Triac Proportional Relay, 277V Max., 2500W Max.

907-124601(1)

S

Smooth painted finish on heater back

T1

Tamperproof Thermostat, Single-pole, 277V, 25 Amp

T2

Tamperproof Thermostat, Double-pole, 277V, 25 Amp with off position

T5

Adjustable Thermostat, Single-pole, 277V, 25 Amp

T6

Adjustable Thermostat, Double-pole, 277V, 25 Amp with off position

907-124602 907-124603 907-124604 907-124605 907-124606 907B-XXX(1) 907-224755 907-224756 907-224757 907-224758

Description Inside Corner Outside Corner Round Pedestal Kit, 3-5”, Qty=2 Square Pedestal Kit, 2”, Qty=2 Splice Plate 2” Long Contour Splice Plate for Code A (Bottom Air Inlet) and/or Heater with Pedestals 24V Relay Kit, 240V, 22 Amp; 277V, 25 Amp 24V Relay Kit with Transformer, 120V, 22 Amp (2-wire only) 24V Relay Kit with Transformer, 208V, 22 Amp 24V Relay Kit with Transformer, 240V, 22 Amp 24V Relay Kit with Transformer, 277V, 19 Amp Blank Section (specify length in inches-XXX) Tamperproof Single-pole Thermostat Kit 277V, 25 Amp Tamperproof Double-pole Thermostat Kit 277V, 25 Amp with off position Single-pole Thermostat Kit 277V, 25 Amp Double-pole Thermostat Kit 277V, 25 Amp with off position

(1) Change 907 prefix to 905 for BISI. Standard colors - Add W for white finish or A for almond finish to the end of part number.

Remote Room Thermostat – See page 31.

Special or custom colors - See inside back cover for color codes to be added to end of part number.

2-1/2"

4" K.O. 1/4"

6-1/8"

3-7/8"

1-3/8" 1-7/8"

BII Series

1-1/8"

2-3/8"

15/16"

K.O. 7/8"

1-1/8"

7/8"

2-3/8" 2-1/2"

4"

K.O. 1/4"

7-1/2"

3-7/8"

1-3/8" 1-7/8" 15/16"

BISI Series 12

2-1/2" K.O. 7/8"

1-1/8" 1-1/8"

7/8"

www.indeeco.com

2-3/8"

800-243-8162

BII/BISI Series

Industrial Sill-Height Convector Industrial Sloped Top Sill-Height Convector BII Model: 907U (Flat Top) BISI Model: 905U (Sloped Top) How to order: Model + Heater Code with color code + Options (example 905U01200NW-1710-T5) Density Length Watts In. (mm) W/Ft W/m

28.8 (733)

38.8 (987)

49 (1248)

58.6 (1489)

67.3 (1710)

76.6 (1947)

85.4 (2170)

94.2 (2395)

103.4 (2627)

Heater Code 120V (1 Ph)

Amps

208V (1 Ph)

Amps

277V (1 Ph)

Watts at Amps 240/208V

Heater Code 240/208V (1 Ph)

Amps

100

330

200

00200B‡-733

1.7

00200C‡-733

1.0





200/150 00200V‡-733 0.8/0.7

150

490

300

00300B‡-733

2.5

00300C‡-733

1.4

00300N‡-733

1.1

300/225 00300V‡-733 1.3/1.1

200

650

400

00400B‡-733

3.3

00400C‡-733

1.9

00400N‡-733

1.4

400/300 00400V‡-733 1.7/1.4

11.6 (5.3)

12.7 (5.8)

15.1 (6.9)

14.9 (6.8)

18.7 (8.5)

17.0 (7.7)

22.0 (10.0)

18.8 (8.5)

25.0 (11.4)

20.8 (9.4)

28.3 (12.8)

1200/900 01200V‡-2170 5.0/4.3 22.7 01600C‡-2170 7.7 01600N‡-2170 5.8 1600/1200 01600V‡-2170 6.7/5.8 (10.3)

31.3 (14.2)

275

900

500

00500B‡

4.2

00500C‡

2.4

00500N‡

1.8

500/375

330

300

00300B‡-987

2.5

00300C‡-987

1.4

00300N‡-987

1.1

300/225 00300V‡-987 1.3/1.1

150

490

450

00450B‡-987

3.8

00450C‡-987

2.2

00450N‡-987

1.6

450/338 00450V‡-987 1.9/1.6

200

650

600

00600B‡-987

5.0

00600C‡-987

2.9

00600N‡-987

2.2

600/450 00600V‡-987 2.5/2.2

00500V‡

00750B‡

6.3

00750C‡

3.6

00750N‡

2.7

750/563

275

900

750

330

400 00400B‡-1248 3.3 00400C‡-1248 1.9 00400N‡-1248 1.4

400/300 00400V‡-1248 1.7/1.4

150

490

600 00600B‡-1248 5.0 00600C‡-1248 2.9 00600N‡-1248 2.2

600/450 00600V‡-1248 2.5/2.2

200

650

800 00800B‡-1248 6.7 00800C‡-1248 3.8 00800N‡-1248 2.9

800/600 00800V‡-1248 3.3/2.9

275

900

1000

1000/750

100

330

500 00500B‡-1489 4.2 00500C‡-1489 2.4 00500N‡-1489 1.8

150

490

750 00750B‡-1489 6.3 00750C‡-1489 3.6 00750N‡-1489 2.7

750/563 00750V‡-1489 3.1/2.7

200

650

1000 01000B‡-1489 8.3 01000C‡-1489 4.8 01000N‡-1489 3.6

1000/750 01000V‡-1489 4.2/3.6

275

900

1250

1250/938

100

330

600 00600B‡-1710 5.0 00600C‡-1710 2.9 00600N‡-1710 2.2

150

490

900 00900B‡-1710 7.5 00900C‡-1710 4.3 00900N‡-1710 3.2

900/675 00900V‡-1710 3.8/3.2

200

650

1200 01200B‡-1710 10.0 01200C‡-1710 5.8 01200N‡-1710 4.3

1200/900 01200V‡-1710 5.0/4.3

275

900

1500

100

330

700 00700B‡-1947 5.8 00700C‡-1947 3.4 00700N‡-1947 2.5

700/525 00700V‡-1947 2.9/2.5

150

490

1050 01050B‡-1947 8.8 01050C‡-1947 5.0 01050N‡-1947 3.8

1050/788 01050V‡-1947 4.3/3.8

200

650

1400 01400B‡-1947 11.7 01400C‡-1947 6.7 01400N‡-1947 5.1 1400/1050 01400V‡-1947 5.8/5.0

275

900

1750

100

330

800 00800B‡-2170 6.7 00800C‡-2170 3.8 00800N‡-2170 2.9

150

490

1200 01200B‡-2170 10.0 01200C‡-2170 5.8 01200N‡-2170 4.3

200

650

1600









01250B‡

01500B‡



10.4

12.5



01000C‡

01250C‡

01500C‡

01750C‡

02000C‡

4.8

6.0

7.2

8.4

9.6

01000N‡

01250N‡

01500N‡

01750N‡

3.6

4.5

00750V‡

2.1/1.8

100

8.3

BII BISI (Flat) (Sloped) 10.4 (4.8)

100

01000B‡

Weight Lbs (kg)

01000V‡

3.1/2.7

4.2/3.6

500/375 00500V‡-1489 2.1/1.8

01250V‡

5.2/4.5

600/450 00600V‡-1710 2.5/2.2

5.4 1500/1125

6.3 1750/1313

01500V‡

01750V‡

6.3/5.4

7.3/6.3

800/600 00800V‡-2170 3.3/2.9

275

900

2000

100

330

900 00900B‡-2395 7.5 00900C‡-2395 4.3 00900N‡-2395 3.2

150

490

1350





200

650

1800





275

900

2250





100

330

1000 01000B‡-2627 8.3 01000C‡-2627 4.8 01000N‡-2627 3.6

150

490

1500





01500C‡-2627 7.2 01500N‡-2627 5.4 1500/1125 01500V‡-2627 6.3/5.4

200

650

2000





02000C‡-2627 9.6 02000N‡-2627 7.2 2000/1500 02000V‡-2627 8.3/7.2

200

650

2250





02250C‡-2627 10.8 02250N‡-2627 8.1 2250/1688 02250V‡-2627 9.4/8.1

275

900

2500





02000N‡

7.2 2000/1500

02000V‡

8.3/7.2

900/675 00900V‡-2395 3.8/3.2

01350C‡-2395 6.5 01350N‡-2395 4.9 1350/1013 01350V‡-2395 5.6/4.9

24.6 01800C‡-2395 8.7 01800N‡-2395 6.5 1800/1350 01800V‡-2395 7.5/6.5 (11.2) 02250C‡

02500C‡

10.8

12.0

02250N‡

02500N‡

8.1 2250/1688

02250V‡

34.4 (15.6)

9.4/8.1

1000/750 01000V‡-2627 4.2/3.6

9.0 2500/1875

02500V‡

26.6 (12.1)

37.6 (17.1)

10.4/9.0

Other single-phase voltages available, consult factory. ‡Standard colors - Add W for white finish or A for almond finish to the end of catalog number when ‡ is indicated. Special or custom colors - See inside back cover for color codes to be added to end of catalog number where ‡ is indicated.

www.indeeco.com

800-243-8162

13

BCHI Series

Aluminum Sill-Height Convection Heater

The sleek, flowing curved aluminum front cover and end caps of the BCHI offer a unique design for architectural applications. They are designed to fit under large windows to prevent cold down drafts. These heaters can provide total or supplemental heating for a variety of applications. The rugged design is built to withstand years of hard usage for your commercial application.

Applications • Air, Rail or Bus Terminals • Auditoriums • Corridors • Entryways • Foyers • Hallways • Lobbies • Offices • Commercial Buildings

Standard

• Easy to Install: Units may be mounted flush to the wall or directly to any floor surface. There are no screws on the front cover. Two rows of mounting holes on the back of the heater are spaced at 2 inch (51 mm) intervals for easy mounting. An electrical junction box is provided at each end of the unit for easy connection to the power wiring. To remove the cover, locate the locking tab at the bottom center of the heater. Rotate the tab counterclockwise with a tool through the air inlet and the cover can be withdrawn.

Special Colors

• Choice of colors: Heaters can be matched to any decor. White or metallic charcoal are standard and a wide range of optional colors and custom finishes are available (see optional color selections on inside back cover).

Standard Construction Features Heating elements – Stainless steel elements with tight fitting aluminum fins float on high temperature nylon bushings for quiet and efficient operation. Housing – Cabinet is constructed of 20-gauge galvanized steel with a robust aluminum front cover. The unit has an epoxy/ polyester powder paint with a satin finish in white or metallic charcoal. Inlet/Outlet Grilles – The fresh air inlet grille is located at the bottom of the front of the unit. The outlet is located at the top with openings less than 0.25” to discourage tampering with the heating element (pencil-proof).

14

www.indeeco.com

Built-in Controls – Linear limit, automatic reset thermal cutout. Electrical Connection – Each baseboard heater has a junction box located on both ends and a built-in full length wire way. Installation Requirements – Field or factory-installed low voltage relay and thermostat kits fit into the right-hand junction box only.

800-243-8162

BCHI Series

Aluminum Sill-Height Convection Heater Field-Installed Options

Factory Built-in Options Code

(shipped loose for field installation into heater)

Description

Catalog Number

Description

D3

Disconnect Switch, 277V Max, Double-pole, 16 Amp

910-277363

Disconnect Switch, 277V, Double-pole, 16 Amp

M1

High Altitude Automatic Cutout

910-277364

24V Relay Kit, 240V, 22 Amp; 277V, 19 Amp

R1

24V Relay, 240V, 22 Amp; 277V, 19 Amp

910-277365

24V Relay Kit with transformer, 120V, 25 Amp

R2

24V Relay with Transformer, 240V, 22 Amp; 277V, 19 Amp

910-277366

24V Relay Kit with transformer, 208V, 22 Amp

R7

24V TRIAC Proportional Relay

910-277367

24V Relay Kit with transformer, 240V, 22 Amp

R8

24V TRIAC Proportional Relay with transformer

910-277368

24V Relay Kit with transformer, 277V, 19 Amp

T1

Tamperproof Thermostat, Single-pole, 277V, 25 Amp

910-277369

24V TRIAC Proportional Relay, 277V, 15 Amp

T2

Tamperproof Thermostat, Double-pole, 277V, 25 Amp with off position

910-277370

24V TRIAC Proportional Relay with transformer, 277V, 15 Amp

T5

Adjustable Thermostat, Single-pole, 277V, 25 Amp

910-277371

Tamperproof Single-pole Thermostat Kit 277V, 25 Amp with off position

T6

Adjustable Thermostat, Double-pole, 277V, 25 Amp with off position

910-277372

Tamperproof Double-pole Thermostat Kit 277V, 25 Amp with off position

910-277373

Thermostat Kit Single-pole 277V, 25 Amp with off position

910-277374

Thermostat Kit Double-pole 277V, 25 Amp with off position

Remote Room Thermostat – See page 31.

¶Standard colors - Add W for white finish or CM for metallic charcoal finish to the end of part number. Special or custom colors - see inside back cover for color codes to be added to end of part number.

Length Wall Length = Length - 3/8" (9.5 mm) Length Length KOE Ø22 mm Length==Length Length - 3/8” mm) WallWall Length -KOE 3/8(9.5 " Ø(9.5 7/8 "mm)

Rear View

47 mm 1 13/16"

KOEØ22 22 mm KOE mm KOE 7/8” KOE Ø7/8"

47 mm 47 mm 1-13/16” 1 13/16"

" (9.5 mm)

Rear View

162 mm 6 3/8"

177 mm

21 mm 21 mm 13/16” 13/16"

104 mm 104 mm 4-1/8” 4 1/8"

162 mm 80 mm 6 3/8"

Side View

13/16"

177 mm 6 15/16"

4 1/8"

73mm mm 73 2-7/8” 2 7/8"

3 1/8"

Side

Rear View

View 73Side mm View 2 7/8"

mm 8080mm 3-1/8” 3 1/8"

KOE 22 mm KOE Ø22 mm KOEØ7/8” 7/8" KOE

Bottom 6 15/16" View

73 mm 2 7/8" www.indeeco.com

21 mm 177mm mm 13/16" 177 15/16" 104 mm 66-15/16” 21 mm

162 mm 162 mm 6-3/8” 6 3/8"

51 mm 2"

51mm mm 51 2” 2"

46 mm 1 13/16"

80 mm 3 1/8"

46mm mm 46 1-13/16” 1 13/16"

113 mm 4 7/16" 113 mm mm 113 4-7/16” 4 7/16"

46 mm 1 13/16"

Side View

33 33mm mm 1-5/16” 1 5/16"

mm 2727mm 11-1/16” 1/16"

KOE 13 mm Ø13 mm KOE KOE 1/2” KOE Ø1/2" 800-243-8162

Bottom View

15

BCHI Series

Aluminum Sill-Height Convection Heater BCHI Model: 910U How to order: Model + Heater Code with color code + Options (example 910U01000BW-T5) Length

Density

Heater Code

Watts In. W/Ft. W/m (mm) 24.6 (625)

150

475

Watts at Amps 240/208V

120V

Amps

208V

Amps

277V

300

910U00300B‡

2.5

910U00300C‡

1.4





300/225

240/208V

Amps

910U00300V‡

1.3/1.1

125

400

300

910U00300B‡-750

2.5

910U00300C‡-750

1.4

910U00300N‡-750

1.1

300/225

200

675

500

910U00500B‡

4.2

910U00500C‡

2.4

910U00500N‡

1.8

500/375

39.5 150 (1004) 225

500

500 910U00500B‡-1004 4.2

910U00500C‡-1004

2.4

910U00500N‡-1004

1.8

500/375 910U00500V‡-1004 2.1/1.8

750

750

910U00750C‡

3.6

910U00750N‡

2.7

750/563

49.8 175 (1265) 250

600

750 910U00750B‡-1265 6.3

800

1000

59.3 200 (1506) 250

650

1000 910U01000B‡-1506 8.3

850

1250

225 68 (1727) 275

725 875

29.5 (750)

910U00750B‡

6.3

910U00500V‡ 910U00750V‡

2.1/1.8 3.1/2.7

910U00750N‡-1265

2.7

750/563 910U00750V‡-1265 3.1/2.7

4.8

910U01000N‡

3.6

1000/750

910U01000C‡-1506

4.8

910U01000N‡-1506

3.6

1000/750 910U01000V‡-1506 4.2/3.6

910U01250C‡

6.0

910U01250N‡

4.5

1250/938

1250 910U01250B‡-1727 10.4 910U01250C‡-1727

6.0

910U01250N‡-1727

4.5

1250/938 910U01250V‡-1727 5.2/4.5

1500

910U01500B‡

12.5

910U01500C‡

7.2

910U01500N‡

5.4

1500/1125

910U01500V‡

6.3/5.4

900

1750





910U01750C‡

8.4

910U01750N‡

6.3

1750/1313

910U01750V‡

7.3/6.3

86.1 200 (2187) 275

700

1500 910U01500B‡-2187 12.5 910U01500C‡-2187

7.2

910U01500N‡-2187

5.4

1500/1125 910U01500V‡-2187 6.3/5.4

925

2000





910U02000C‡

9.6

910U02000N‡

7.2

2000/1500

94.9 225 (2412) 300

725

1750





910U01750C‡-2412

8.4

910U01750N‡-2412

6.3

1750/1313 910U01750V‡-2412 7.3/6.3

925

2250





910U02250C‡

10.8

910U02250N‡

8.1

2250/1688

225

750

2000





910U02000C‡-2644

9.6

910U02000N‡-2644

7.2

2000/1500 910U02000V‡-2644 8.36/7.2

850

2250





910U02250C‡-2644 10.8 910U02250N‡-2644

8.1

2250/1688 910U02250V‡-2644 9.4/8.1

950

2500





104.1 250 (2644) 300

910U01000B‡ 910U01250B‡

8.3 10.4

910U00750N‡-1265 3.6

910U00300V‡-750 1.3/1.1

910U01000C‡

77.3 275 (1964)

910U02500C‡

12.0

01500N‡-2632

9

2500/1875

Other single-phase voltages available, consult factory. All models listed are single-phase. Standard colors - Add W for white finish or CM for metallic charcoal finish to the catalog number when ‡ is indicated. Special or custom colors - See inside back cover for color codes to be added to the catalog number where ‡ is indicated.

16

Heater Code

www.indeeco.com

800-243-8162

910U01000V‡ 910U01250V‡

910U02000V‡ 910U02250V‡

01500V‡-2632

4.2/3.6 5.2/4.5

8.3/7.2 9.4/8.1

10.4/9.0

BAI/BASI Series

Architectural Convector Architectural Sloped Top Convector

BAI

BASI

Applications • Banks

• Halls

• Classrooms

• Offices

The BAI/BASI architectural convectors are designed to heat large commercial spaces without the fan noise associated with unit heaters. • I nstallation Options: Units may be mounted to the wall, flush on the floor or on pedestals. Custom lengths, blank sections, sub-bases and inside or outside corners are available for wall-to-wall installations. Units and accessories can be ordered with smooth painted finish when the back of the heater is visible. • A  dded Safety: The sloped-top cabinet on the BASI prevents objects from being set on top of the heater, which can restrict airflow and cause overheating. • R  ecessed Mounting: The BAI heater can be fully recessed when the front warm air outlet option is used. • C  hoice of Colors: Heaters can be matched to any décor. White or almond is standard and a wide range of optional colors and custom finishes are also available.

Standard

Special Colors

• Conference Rooms

Standard Construction Features Heating Elements – Stainless steel elements with aluminum fins float on high temperature nylon bushings for quiet operation. Housing – Cabinet is constructed of 20-gauge steel with a 16-gauge steel front cover. The unit has an epoxy/polyester powder paint finish in white or almond. Inlet/Outlet Grilles – The fresh air inlet grille is located on the front of the unit. An extruded aluminum outlet grille discourages tampering with the heating element.

www.indeeco.com

Built-in Controls – Linear limit, automatic reset thermal cutout. Installation Requirements – Field or factory-installed low voltage relay and thermostat kits. These units are not designed for residential use in the United States. Rough In Dimensions – BAI only: Heater Length + 1” wide x

15” high x 6” deep.

800-243-8162

17

BAI/BASI Series

Architectural Convector Architectural Sloped Top Convector Factory Built-in Options Code D1

Description

Field-Installed Options

(shipped loose for field installation into heater) Catalog Number

Description

Disconnect Switch, Three-pole, 600V, 32 Amp

909-124609

BAI Corner (interior and exterior)

F

Front Air outlet (BAI Only)

908-124609

BASI inside corner

R1

24V Relay, Single-pole, 240V, 22 Amp; 277V, 19 Amp

908-218356

BASI outside corner

R2

24V Relay with Transformer, 240V, 22 Amp; 277V, 19 Amp

909-124610

Square Pedestal Kit

909-124611

27.2 (690)

R3

24V Double-pole Relay, 240V, 25 Amp; 277V, 19 Amp

909-124612

37.2 (944)

R4

240V Relay, Single-pole, 240V, 25 Amp

909-124613

R5

240V Relay, Double-pole, 240V, 25 Amp

909-124614

R6

Pneumatic Relay, 480V, 20 Amp

909-124615

R7

Triac Proportional Relay, 277V Max., 2500W Max.

909-124616

75.2 (1909)

S

Smooth painted finish on heater back

909-124617

83.2 (2112)

T1

Tamperproof Thermostat, Single-pole, 240V, 30 Amp; 480V, 15 Amp

909-218276(1)

27.2 (690)

909-218277(1)

37.2 (944)

T2

Tamperproof Thermostat, Double-pole, 480V, 15 Amp

909-218278(1)

X1

240V Transformer - 50 VA

909-218279(1)

X2

24V Transformer - 50 VA

909-218280(1)

Empty Cabinet Length In. (mm)

47.2 (1198) 57.2 (1452) 65.2 (1655)

47.2 (1198) 57.2 (1452) 65.2 (1655)

909-218281(1)

75.2 (1909)

909-218282(1)

83.2 (2112)

909-124618

27.2 (690)

909-124619

37.2 (944)

909-124620 909-124621

Remote Room Thermostat – See page 31.

Sub Base Heater Length In. (mm)

3 (76) High

909-124622

Recessed Trim Kit Heater Length In. (mm)

47.2 (1198) 57.2 (1452) 65.2 (1655)

909-124623

75.2 (1909)

909-124624

83.2 (2112)

909-124628(1)

Control Box - 12”

909-124629

24V Relay Kit, Single-pole, 240V, 22 Amp; 277V, 19 Amp

12 (305)

909-124630

24V Relay Kit, Double-pole, 240V, 25 Amp

909-124633

24V Relay Kit with Transformer, 208V, 22 Amp

909-124634

24V Relay Kit with Transformer, 240V, 22 Amp

909-124635

24V Relay Kit with Transformer, 277V, 19 Amp

(1) Change 909 prefix to 908 for BASI. Standard colors - Add W for white finish or A for almond finish to the end of part number. Special or custom colors - See inside back cover for color codes to be added to end of part number. Empty cabinet sections can be cut to length in the field.

18

www.indeeco.com

800-243-8162

BAI/BASI Series

Architectural Convector Architectural Sloped Top Convector 7-1/2”

14” 2” 8-1/2”

4-1/2”

K.O. Ø1/4"

3”

K.O. 1-1/8” - 7/8”

K.O. Ø7/8"

2-1/4”

K.O. 1/4”

5-3/16”

8-1/32" 4" 2”

K.O. 1-1/8” - 7/8”

2”

BAI Series

2-1/32"

2-1/32"

K.O. 1-1/8" 4" 7-17/32"

4"

K.O. 7/8" 2"

K.O. 1/4" 4-1/32"

14-1/16" 2-27/32"

4-15/32"

2"

2-31/32"

4-15/32"

L

2" 5-3/16"

K.O. 1/4"

2-9/32"

2-21/32"

2-1/32"

2-21/32"

2-1/32"

K.O. 1-1/8"

BASI Series

www.indeeco.com

800-243-8162

19

BAI/BASI Series

Architectural Convector Architectural Sloped Top Convector BAI Model: 909U (Flat Top) BASI Model: 908U (Sloped Top) How to order: Model + Heater Code with color code + Options (example 909U02000NW-1655-T1) Length In. (mm)

Density

Heater Code Watts

Amps

277V (1 Ph)

00800C‡-690

3.8

00800N‡-690

2.9

800/600

00800V‡-690

3.3/2.9

01000C‡

4.8

01000N‡

3.6

1000/750

01000V‡

4.2/3.6

1000

01000C‡-944

4.8

01000N‡-944

3.6

1000/750

01000V‡-944

4.2/3.6

1640

1500

01500C‡

7.2

01500N‡

5.4

1500/1125

01500V‡

6.3/5.4

W/Ft

W/m

27.2 (690)

375

1250

800

500

1640

1000

37.2 (944)

375

1250

500

208V (1 Ph)

Heater Code Watts at 240/208V

Amps

240/208V (1 Ph)

47.2 (1198)

375

1250

1500

01500C‡-1198

7.2

01500N‡-1198

5.4

1500/1125

01500V‡-1198

6.3/5.4

500

1640

2000

02000C‡

9.6

02000N‡

7.2

2000/1500

02000V‡

8.3/7.2

57.2 (1452)

375

1250

1750

01750C‡-1452

8.4

01750N‡-1452

6.3

1750/1313

01750V‡-1452

7.3/6.3

500

1640

2500

02500C‡

12.0

02500N‡

9.0

2500/1875

02500V‡

10.4/9.0

375

1250

2000

02000C‡-1655

9.6

02000N‡-1655

7.2

2000/1500

02000V‡-1655

8.3/7.2

500

1640

3000

03000C‡

14.4

03000N‡

10.8

3000/2250

03000V‡

12.5/10.8

65.2 (1655) 75.2 (1909)

375

1250

2500

02500C‡-1909

12.0

02500N‡-1909

9.0

2500/1875

02500V‡-1909

10.4/9.0

500

1640

3500

03500C‡(1)

16.8

03500N‡

12.6

3500/2625

03500V‡

14.6/12.6

83.2 (2112)

375

1250

2750

02750C‡-2112

13.2

02750N‡-2112

9.9

2750/2066

02750V‡-2112

11.5/9.9

500

1640

4000

04000C‡(1)

19.2

04000N‡

14.4

4000/3000

04000V‡

16.7/14.4

Other single-phase voltages available, consult factory.

‡Standard colors - Add W for white finish or A for almond finish to the end of catalog number when ‡ is indicated. Special or custom colors - See inside back cover for color codes to be added to end of catalog number where ‡ is indicated. (1) If control option R7 is required for these heaters, (Qty 2) R7 Triac proportional relays are required.

20

Amps

www.indeeco.com

800-243-8162

Weight Lbs (kg) BAI (Flat)

BASI (Sloped)

30 (13.6)

32.0 (14.5)

46 (20.9)

46 (20.9)

57 (25.9)

57 (25.9)

66 (29.9)

66 (30)

75 (34.0)

75 (34.1)

80 (36.3)

80 (36.3)

89 (40.4)

89 (40.5)

BMI Series

Mini Draft Barrier Heater

The BMI mini draft barrier heaters are designed to fit under large windows to prevent cold down drafts. The heater provides total or supplemental heating for a variety of applications. • Installation Options: Units may be wall mounted or installed on the floor using pedestal kits. Custom lengths, blank sections, and inside or outside corners are available for wall-to-wall installations. Units can be ordered with Option “S” smooth painted finish back plate when the back of the heater is visible. • C  hoice of Colors: Heaters can be matched to any décor. White or almond is standard and a wide range of optional colors and custom finishes including anodized aluminum are available.

Applications • Commercial Buildings • Entryways • Hallways • Schools

Standard

Special Colors

Standard Construction Features Heating Elements – Stainless steel elements with aluminum fins float on high temperature nylon bushings for quiet operation. Housing – Cabinet is constructed of 18-gauge steel with a

14-gauge aluminum front and top covers. The unit has an epoxy/polyester powder paint finish in white or almond. End caps are provided on all units.

Inlet/Outlet Grilles – The fresh air inlet is located on the bot-

tom of the unit. The top outlet grille has openings less than 0.25 inches to discourage tampering with the heating element (pencil-proof).

www.indeeco.com

Built-in Controls – Linear limit, automatic reset thermal cutout. Electrical Connection – Each heater has a junction box located at the right end and a built-in full length wireway. Separate low voltage wireway is available. Mounting Requirements – Minimum installation height above

the floor is two inches. Field or factory-installed low voltage relay and thermostat kits fit into the right-hand junction box only. These units are not for residential use in the United States.

800-243-8162

21

BMI Series

Mini Draft Barrier Heater Factory Built-in Options

Field-Installed Options

(shipped loose for field installation into heater) Code

Catalog Number

Description

Description

D3

Disconnect Switch, Double-pole, 277V, 16 Amp

914-166740

Inside Corner

F1

24V Wireway

914-166741

Outside Corner

L

Custom Length

914-166742

Round Pedestal Kit, 3-5”, Qty 2

M1

High Altitude Automatic Cutout

914-166743

Square Pedestal Kit, 2”, Qty 2

R1

24V Relay, 240V, 22 Amp; 277V, 19 Amp; 600V, 10 Amp

914-166744

Splice Plate 2” Long

R2

24V Relay with Transformer, 240V, 22 Amp; 277V, 19 Amp

R6

Pneumatic Relay, 480V, 20 Amp

914-166745

Contoured Splice Plate for Code S (smooth painted finish on heater back) and/or Heater with Pedestals

R7

Triac Proportional Relay 277V Max., 2500W Max.

941-1666746

24V Relay Kit, 240V, 22 Amp; 277V, 19 Amp

S

Smooth painted finish on heater back (2)

914-166747

24V Relay Kit with Transformer, 208V, 22 Amp

T1

Tamperproof Thermostat, Single-pole, 277V, 25 Amp

914-166748

24V Relay Kit with Transformer, 240V, 22 Amp

T2

Tamperproof Thermostat, Double-pole, 277V, 25 Amp with off position

914-166749

24V Relay Kit with Transformer, 277V 19 Amp

T5

Adjustable Thermostat, Single-pole, 277V, 25 Amp; 600V, 10 Amp

T6

Adjustable Thermostat, Double-pole, 277V, 25 Amp with off position

914B-XXX

(2) For anodize aluminum finished heaters, smooth back is affixed with rivets.

Remote Room Thermostat – See page 31.

Blank Section (specify length in inches-XXX)

914-224761

Tamperproof Single-pole Thermostat Kit 277V, 25 Amp; 600V, 10 Amp

914-224762

Tamperproof Double-pole Thermostat Kit 277V, 25 Amp; 600V, 10 Amp with off position

914-224763

Single-pole Thermostat Kit 277V, 25 Amp; 600V, 10 Amp

914-224764

Single-pole Thermostat Kit 277V, 25 Amp; 600V, 10 Amp with off position

Standard colors - Add W for white finish or A for almond finish to the end of part number. Special or custom colors - See inside back cover for color codes to be added to end of part number.

2-1/2” Top View

4-1/2”

Rear View

2”

K.O. 7/8”

1” 1-5/8”

3-3/16”

Smooth Finish on heater back (S)

Standard Finish on heater back

3-3/4” Side View

Front View

22

Shown with optional square pedestal. www.indeeco.com

Sufficient Height 2” from Floor

800-243-8162

BMI Series

Mini Draft Barrier Heater BMI Model: 914U How to order: Model + Heater Code with color code + Options (example 914U00400NW-1200-T5) Density Length Watts In. (mm) W/Ft W/m 27.6 (700) 35.4 (900)

47.3 (1200)

59.1 (1500)

70.9 (1800)

82.7 (2100)

94.5 (2400)

Heater Code 208V (1 Ph)

Amps

277V (1 Ph)

Amps

480V (1 Ph)

Watts Amps 240/208V

Heater Code 240/208V (1 Ph)

Amps

150

490 300

00300C‡-700

1.4

00300N‡-700

1.1





300/225

00300V‡-700

1.3/1.1

175

574 350

00350C‡

1.7

00350N‡

1.3





350/263

00350V‡

1.5/1.3

100

330 300

00300C‡-900

1.4

00300N‡-900

1.1

00300T‡-900

0.6

300/225

00300V‡-900

1.3/1.1

150

490 450

00450C‡-900

2.2

00450N‡-900

1.6

00450T‡-900

0.9

450/338

00450V‡-900

1.9/1.6

175

574 525

00525C‡

2.5

00525N‡

1.9

00525T‡

1.1

525/394

00525V‡

2.2/1.9

100

330 400 00400C‡-1200 1.9

00400N‡-1200

1.4

00400T‡-1200

0.8

400/300

00400V‡-1200 1.7/1.4

150

490 600 00600C‡-1200 2.9

00600N‡-1200

2.2

00600T‡-1200

1.3

600/450

00600V‡-1200 2.5/2.2

175

574 700

00700N‡

2.5

00700T‡

1.5

700/526

100

330 500 00500C‡-1500 2.4

00500N‡-1500

1.8

00500T‡-1500

1.0

500/375

00500V‡-1500 2.1/1.8

150

490 750 00750C‡-1500 3.6

00750N‡-1500

2.7

00750T‡-1500

1.6

750/563

00750V‡-1500 3.1/2.7

175

574 875

00875N‡

3.2

00875T‡

1.8

875/657

100

330 600 00600C‡-1800 2.9

00600N‡-1800

2.2

00600T‡-1800

1.3

600/450

00600V‡-1800 2.5/2.2

150

490 900 00900C‡-1800 4.3

00900N‡-1800

3.2

00900T‡-1800

1.9

900/675

00900V‡-1800 3.8/3.2

175

574 1050

01050N‡

3.8

01050T‡

2.2

1050/789

00700C‡

00875C‡

01050C‡

3.4

4.2

5.0

00700V‡

00875V‡

01050V‡

2.9/2.5

3.6/3.2

100

330 700 00700C‡-2100 3.4

00700N‡-2100

2.5

00700T‡-2100

1.5

700/525

490 1050 01050C‡-2100 5.0

01050N‡-2100

3.8

01050T‡-2100

2.2

1050/788 01050V‡-2100 4.4/3.8

175

574 1225

01225N‡

4.4

01225T‡

2.6

1225/920

100

330 800 00800C‡-2400 3.8

00800N‡-2400

2.9

00800T‡-2400

1.7

800/600

150

490 1200 01200C‡-2400 5.8

01200N‡-2400

4.3

01200T‡-2400

2.5

1200/900 01200V‡-2400 5.0/4.3

175

574 1400

01400N‡

5.1

01400T‡

2.9

1400/1052

01400C‡

5.9

6.7

00700V‡-2100 2.9/2.5 01225V‡

5.1/4.4

00800V‡-2400 3.3/2.9 01400V‡

7 (3.2) 8.3 (3.8)

10.2 (4.6)

12 (5.5)

13.9 (6.3)

4.4/3.8

150

01225C‡

Weight Lbs (kg)

5.8/5.1

15.8 (7.2)

17.6 (8)

Other voltages available, consult factory.

‡Standard colors - Add W for white finish or A for almond finish to the end of catalog number when ‡ is indicated. Special or custom colors - See inside back cover for color codes to be added to end of catalog number where ‡ is indicated

www.indeeco.com

800-243-8162

23

BHI Series

High Watt Density Draft Barrier

Applications • Commercial Buildings

• Hospitals

• Entryways

• Shopping Centers

• Hallways

Standard

Special Colors

The BHI high watt density draft barrier heaters are designed to fit under large windows to prevent cold down drafts. The heater provides total or supplemental heating for a variety of applications. • I nstallation Options: Units may be wall mounted or installed on the floor using pedestal kits. Custom lengths, blank sections and inside or outside corners are available for wall-to-wall installations. Units can be ordered with smooth painted finish back plate when the back of the heater is visible. These units are not, however, designed for residential use. • C  hoice of Colors: Heaters can be matched to any décor. White or almond is standard and a wide range of optional colors and custom finishes, including anodized aluminum, are also available.

Standard Construction Features Heating Elements – Two stainless steel elements with aluminum fins float on high temperature nylon bushings for quiet operation. Housing – Cabinet is constructed of 18-gauge steel with a

14-gauge aluminum front and top covers. The unit has an epoxy/polyester powder paint finish in white or almond. End caps are provided on all units.

Inlet/Outlet Grilles – The fresh air inlet is located on the bottom of the unit. The top outlet grille has openings less than 0.25 inches to discourage tampering with the heating element (pencil-proof).

24

www.indeeco.com

Built-in Controls – Linear limit, automatic reset thermal cutout. Electrical Connection – Each heater has a junction box located at the right end and a built-in full length wireway. Seprate low voltage wireway is available. Installation Requirements – Minimum installation height

above the floor is three inches. Field or factory-installed low voltage relay and thermostat kits fit into the right-hand junction box only. These units are not for residential use in the United States.

800-243-8162

BHI Series

High Watt Density Draft Barrier Factory Built-in Options Code

Field-Installed Options

(shipped loose for field installation into heater) Catalog Number

Description

Description

D1

Disconnect Switch, Three-pole, 600V, 32 Amp

916-166753

Inside Corner

D3

Disconnect Switch, Double-pole, 277V, 16 Amp

916-166754

Outside Corner

F1

24V Wireway

916-166756

Square Pedestal Kit, 3”, Qty 2

L

Custom Length

916-166757

Splice Plate 2” Long Contoured Splice Plate for Code S (smooth painted finish on heater back) and/or Heater with Pededstals

M1

High Altitude Automatic Cutout

R1

24V Relay, 240V, 22 Amp; 277V, 19 Amp; 600V, 10 Amp

916-166758

R2

24V Relay with Transformer, 240V, 22 Amp; 277V, 19 Amp

916-166759

24V Relay Kit, 240V, 22 Amp; 277V, 19 Amp

R6

Pneumatic Relay, 480V, 20 Amp

916-166760

24V Relay Kit with Transformer, 208V, 22 Amp

R7

Triac Proportional Relay 277V Max., 2500W Max.

916-166761

24V Relay Kit with Transformer, 240V, 22 Amp

S

Smooth painted finish on heater back (2)

916-166762

24V Relay Kit with Transformer, 277V 19 Amp

T1

Tamperproof Thermostat, Single-pole, 240V, 25 Amp; 600V, 10 Amp

T2

Tamperproof Thermostat, Double-pole, 240V, 25 Amp; 600V, 10 Amp

T5

Adjustable Thermostat, Single-Pole 277V, 25 Amp, 600V, 10 Amp

T6

Adjustable Thermostat, Double-Pole 277V, 25 Amp, 600V, 10 Amp

916B-XXX

(2) For anodize aluminum finished heaters, smooth back is affixed with rivets.

Blank Section (specify length in inches-XXX)

916-224765

Tamperproof Thermostat, Single-pole, 240V, 25 Amp; 600V, 10 Amp

916-224766

Tamperproof Thermostat, Double-pole, 240V, 25 Amp; 600V, 10 Amp

916-264350

Adjustable Single-pole Thermostat Kit 240V, 25 Amp; 600V, 10 Amp with off position

916-264351

Adjustable Double-pole Thermostat Kit 240V, 25 Amp; 600V, 10 Amp with off position

Standard colors - Add W for white finish or A for almond finish to the end of part number.

Remote Room Thermostat – See page 31.

Special or custom colors - See inside back cover for color codes to be added to end of part number.

5-3/4”

Shown with optional square pedestals.

Top View K.O. 1/4”

Front View Sufficient Height 3” from Floor

6”

1-7/8”

K.O. 7/8”

3” Rear View

Side View 2-1/4”

3-3/16” Standard Finish on heater back Smooth Finish on heater back - (S)

3-3/16”

www.indeeco.com

800-243-8162

25

BHI Series

High Watt Density Draft Barrier

BHI Model: 916U How to Order: Model + Heater Code with color code + Options (example 916U00875CW-1500-T1) Density Length Watts In. (mm) W/Ft W/m 175 23.6 (600)

35.4 (900)

47.3 (1200)

59.1 (1500)

70.9 (1800)

82.7 (2100)

94.5 (2400)

Heater Code 208V (1 Ph)

Amps

277V (1 Ph)

Amps

480V (1 Ph)

Amps

Watts at 240/208V

240/208V (1 Ph)

Amps

575

375

00375C‡-600

1.8

00375N‡-600

1.4





375/281

00375V‡-600

1.6/1.4

250

820

500

00500C‡-600

2.4

00500N‡-600

1.8





500/375

00500V‡-600

2.1/1.8

355

1165

750

00750C‡

3.6

00750N‡

2.7





750/563

00500V‡

3.1/2.7

500

1640

1000

01000C‡-600

4.8

01000N‡-600

3.6

01000T‡-600

2.1

1000/750 01000V‡-600

4.2/3.6

175

575

500

00500C‡-900

2.4

00500N‡-900

1.8

00500T‡-900

1.0

500/375

00500V‡-900

2.1/1.8

250

820

750

00750C‡-900

3.6

00750N‡-900

2.7

00750T‡-900

1.6

750/563

00750V‡-900

3.1/2.7

355

1165

1000

01000C‡

4.8

01000N‡

3.6

01000T‡

2.1

1000/751

01000V‡

4.2/3.6

500

1640

1500

01500C‡-900

7.2

01500N‡-900

5.4

01500T‡-900

3.1

1500/1125 01500V‡-900

175

575

700

00700C‡-1200

3.4

00700N‡-1200

2.5

00700T‡-1200

1.5

250

820

1000

01000C‡-1200

4.8

01000N‡-1200

3.6

01000T‡-1200

2.1

1000/750 01000V‡-1200 4.2/3.6

355

1165

1400

01400C‡

6.7

01400N‡

5.1

01400T‡

2.9

1400/1052

500

1640

2000

02000C‡-1200

9.6

02000N‡-1200

7.2

02000T‡-1200

4.2

2000/1500 02000V‡-1200 8.3/7.2

175

575

875

00875C‡-1500

4.2

00875N‡-1500

3.2

00875T‡-1500

1.8

875/656 00875V‡-1500 3.6/3.2

250

820

1250

01250C‡-1500

6.0

01250N‡-1500

4.5

01250T‡-1500

2.6

1250/938 01250V‡-1500 5.2/4.5

355

1165

1750

01750C‡

8.4

01750N‡

6.3

01750T‡

3.6

1750/1314

500

1640

2500

02500C‡-1500

12

02500N‡-1500

9.0

02500T‡-1500

5.2

2500/1875 02500V‡-1500 10.4/9.0

175

575

1050

01050C‡-1800

5.0

01050N‡-1800

3.8

01050T‡-1800

2.2

1050/788 01050V‡-1800 4.4/3.8

250

820

1500

01500C‡-1800

7.2

01500N‡-1800

5.4

01500T‡-1800

3.1

1500/1125 01500V‡-1800 6.3/5.4

355

1165

2100

02100C‡

10.1

02100N‡

7.6

02100T‡

4.4

2100/1577

500

1640

3000

03000C‡-1800

14.4

03000N‡-1800

10.8

03000T‡-1800

6.3

3000/2250 03000V‡-1800 12.5/10.8

175

575

1225

01225C‡-2100

5.9

01225N‡-2100

4.4

01225T‡-2100

2.6

1225/919 01225V‡-2100 5.1/4.4

350

820

1750

01750C‡-2100

8.4

01750N‡-2100

6.3

01750T‡-2100

3.6

1750/1313 01750V‡-2100 7.3/6.3

355

1165

2450

02450C‡

11.8

02450N‡

8.8

02450T‡

5.1

2450/1840

500

1640

3500

03500C‡-2100

16.8

03500N‡-2100

12.6

03500T‡-2100

7.3

3500/2625 03500V‡-2100 14.6/12.6

175

575

1400

01400C‡-2400

6.7

01400N‡-2400

5.1

01400T‡-2400

2.9

1400/1050 01400V‡-2400 5.8/5.0

250

820

2000

02000C‡-2400

9.6

02000N‡-2400

7.2

02000T‡-2400

4.2

2000/1500 02000V‡-2400 8.3/7.2

355

1165

2800

02800C‡

13.5

02800N‡

10.1

02800T‡

5.8

2800/2103

500

1640

4000

04000C‡-2400

19.2

04000N‡-2400

14.4

04000T‡-2400

8.3

4000/3000 04000V‡-2400 16.7/14.4

Other voltages available, consult factory.

‡Standard colors - Add W for white finish or A for almond finish to the end of catalog number when ‡ is indicated. Special or custom colors - See inside back cover for color codes to be added to end of catalog number where ‡ is indicated.

26

Heater Code

www.indeeco.com

800-243-8162

Weight Lbs (kg)

10.7 (4.8)

14.1 (6.4)

6.3/5.4

700/525 00700V‡-1200 2.9/2.5 01400V‡

01750V‡

02100V‡

02450V‡

02800V‡

5.8/5.1

7.3/6.3

8.8/7.6

10.2/8.8

17.6 (8.0)

21.1 (9.6)

24.6 (11.1)

28.0 (12.7)

31.5 11.7/10.1 (14.3)

CAI/CASI Series

Architectural Cabinet Convector Architectural Sloped Top Cabinet Convector

The CAI/CASI convectors are designed to heat large commercial spaces. They provide large amounts of heat without the fan noise associated with unit heaters. • Installation Options: Units may be mounted to the wall, flush on the floor or on pedestals. CAI units can be fully recessed when the front warm air outlet option is used. These units are not for residential use in the United States. • Added Safety: The sloped-top cabinet on the CASI prevents objects from being set on top of the heater, which can restrict airflow and cause overheating. • W  all-to-Wall Installation: A smooth painted finish back plate is available so that the unit can be mounted against glass walls.

CAI

Standard

Special Colors

CASI

Applications • Classrooms

• Hallways

• Conference Rooms

• Lobbies

Standard Construction Features Heating Elements – Stainless steel elements with aluminum fins float on high temperature nylon bushings for quiet operation. Housing – Cabinet is constructed of 20-gauge steel with a

16-gauge steel front cover. The unit has an epoxy/polyester powder paint finish in white or almond. Mounting holes are

provided along the back of the cabinet for wall installation. Inlet/Outlet Grilles – The fresh air inlet grille is located on the

front of the unit. An extruded aluminum outlet grille discourages tampering with the heating elements.

Built-in Controls – Linear limit, automatic reset thermal cutout. Rough In Dimensions – CAI only: Heater Length + 1” wide x

21” high x 6” deep.

www.indeeco.com

800-243-8162

27

CAI/CASI Series

Architectural Cabinet Convector Architectural Sloped Top Cabinet Convector Factory Built-in Options Code D1

Description

Field-Installed Options

(shipped loose for field installation into heater) Catalog Number

Description

Disconnect Switch, Three-pole, 600V, 32 Amp

912-124546

CAI Corner (interior and exterior)

F

Front Air outlet (CAI Only)

911-124546

CASI inside corner

R1

24V Relay, Single-pole, 240V, 22 Amp; 277V, 19 Amp

911-218358

CASI outside corner

R2

24V Relay with Transformer, 240V, 22 Amp; 277V, 19 Amp

912-124547

Universal Round Pedestal Kit

R3

24V Double-pole Relay, 240V, 25 Amp; 277V, 19 Amp

912-124548

R4

240V Relay, Single-pole, 240V, 25 Amp

912-124549

R5

240V Relay, Double-pole, 240V, 25 Amp

912-124550

R6

Pneumatic Relay, 480V, 20 Amp

912-124551

R7

Triac Proportional Relay, 277V Max., 2500W Max.

912-124552

65.2 (1655)

S

Smooth painted finish on heater back

912-218283(1)

27.2 (690)

T1

Tamperproof Thermostat, Single-pole, 240V, 30 Amp; 480V, 15 Amp

912-218284(1)

T2

Tamperproof Thermostat, Double-pole, 480V, 15 Amp

912-218286(1)

X1

240V Transformer - 50 VA

912-218287(1)

65.2 (1655)

X2

24V Transformer - 50 VA

912-124553

27.2 (690)

27.2 (690) Sub Base Heater Length In. (mm)

Empty Cabinet Length In. (mm)

912-218285(1)

912-124554

Recessed Trim Kit Heater Length In. (mm)

912-124555 912-124556 912-124557

Remote Room Thermostat – See page 31.

3 (76) High 37.2 (944) 47.2 (1198) 57.2 (1452)

37.2 (944) 47.2 (1198) 57.2 (1452)

37.2 (944) 47.2 (1198) 57.2 (1452) 65.2 (1655)

912-124561(1)

Control Box - 12”

912-124562

24V Relay Kit, Single-pole, 240V, 22 Amp; 277V, 19 Amp

12 (306)

912-124563

24V Relay Kit, Double-pole, 240V, 25 Amp; 277V, 19 Amp

912-124566

24V Relay Kit with Transformer, 208V, 22 Amp

912-124567

24V Relay Kit with Transformer, 240V, 22 Amp

912-124568

24V Relay Kit with Transformer, 277V, 19 Amp

912-224767 (1)

Tamperproof Thermostat, Single-pole, 240V, 30 Amp; 480V, 15 Amp

912-224768 (1)

Tamperproof Thermostat, Double-pole 480V, 15 Amp

(1) Change 912 prefix to 911 for CASI. Standard colors - Add W for white finish or A for almond finish to the end of part number. Special or custom colors - See inside back cover for color codes to be added to end of part number. Empty cabinet sections can be cut to length in the field.

28

www.indeeco.com

800-243-8162

CAI/CASI Series

Architectural Cabinet Convector Architectural Sloped Top Cabinet Convector Unit with Grille On Top K.O. 4”x 2” 7-1/4”

K.O. 1/4” K.O. 7/8”

2-1/2” 8”

8-1/2”

K.O. 7/8”

12-1/2” 6” Unit with Grille On Front (Option F) Rear View K.O. 7/8”

5-3/16” Left Side View

20-3/16”

2”

Bottom View

L

CAI Series

K.O. 7/8” K.O. 1/4” 2”

8-15/32”

8”

2”

K.O. 1-1/8” 6”

4-1/32” Rear View

Front View

5-3/16” Left Side View

K.O. 1/4” K.O. 1-1/8”

CASI Series 2”

Bottom View

www.indeeco.com

800-243-8162

29

CAI/CASI Series

Architectural Cabinet Convector Architectural Sloped Top Cabinet Convector CAI Model: 912U (Flat Top) CASI Model: 911U (Sloped Top) How to order: Model + Heater Code with color code + Options (example: 912U03000CW-1198-T1) Density Length In. (mm) W/Ft W/m

27.2 (690)

37.2 (944)

47.2 (1198)

57.2 (1452)

Heater Code Watts

208V (1 ph)

Amps

240V (1 ph)

Amps

277V (1 ph)

Amps

Watts at 240/208V

240/208V (1 ph)

Amps

500

1640

1000

01000C‡-690

4.8

01000J‡-690

4.2

01000N‡-690

3.6

1000/750

01000V‡-690

4.2/3.6

750

2450

1500

01500C‡-690

7.2

01500J‡-690

6.3

01500N‡-690

5.4

1500/1125

01500V‡-690

6.3/5.4

1000

3280

2000

02000C‡

9.6

02000J‡

8.3

02000N‡

7.2

2000/1500

02000V‡

8.3/7.2

500

1640

1500

01500C‡-944

7.2

01500J‡-944

6.3

01500N‡-944

5.4

1500/1125

01500V‡-944

6.3/5.4

750

2450

2250

02250C‡-944

10.8

02250J‡-944

9.4

02250N‡-944

8.1

2250/1690

02250V‡-944

9.4/8.1

1000

3280

3000

03000C‡

14.4

03000J‡

12.5

03000N‡

10.8

3000/2250

03000V‡

12.5/10.8

500

1640

2000

02000C‡-1198

9.6

02000J‡-1198

8.3

02000N‡-1198

7.2

2000/1500

02000V‡-1198

8.3/7.2

750

2450

3000

03000C‡-1198

14.4

03000J‡-1198

12.5

03000N‡-1198

10.8

3000/2250

03000V‡-1198 12.5/10.8

1000

3280

4000

04000C‡

19.2

04000J‡

16.7

04000N‡

14.4

4000/3000

04000V‡

16.7/14.4

500

1640

2500

02500C‡-1452

12.0

02500J‡-1452

10.4

02500N‡-1452

9.0

2500/1875

02500V‡-1452

10.4/9.0

750

2450

3750

03750C‡-1452

18.0

03750J‡-1452

15.6

03750N‡-1452

13.5

3750/2817

03750V‡-1452 15.6/13.5

1000

3280

5000

05000C‡

24.0

05000J‡

20.8

05000N‡

18.1

5000/3750

500

1640

3000

03000C‡-1655

14.4

03000J‡-1655

12.5

03000N‡-1655

10.8

3000/2250

03000V‡-1655 12.5/10.8

750

2450

4500

04500C‡-1655

21.6

04500J‡-1655

18.8

04500N‡-1655

16.2

4500/3380

04500V‡-1655 18.8/16.3

1000

3280

6000

06000C‡

28.8

06000J‡

25.0

06000N‡

21.7

6000/4500

Density Length In. (mm) W/Ft W/m

Watts

208V (3 ph)

Amps

240V (3 ph)

Amps

480V (3 ph)

Amps

Watts at 240/208V

65.2 (1655)

27.2 (690)

37.2 (944)

47.2 (1198)

57.2 (1452)

65.2 (1655)

Heater Code

05000V‡

06000V‡

Heater Code 240/208V (3 ph)

Amps

1000

01000D‡-690

2.8

01000K‡-690

2.4

01000U‡-690

1.2

1000/750

01000P‡-690

2.8/2.1

750

2450

1500

01500D‡-690

4.2

01500K‡-690

3.6

01500U‡-690

1.8

1500/1125

01500P‡-690

3.6/3.1

1000

3280

2000

02000D‡

5.6

02000K‡

4.8

02000U‡

2.4

2000/1500

02000P‡

4.8/4.2

500

1640

1500

01500D‡-944

4.2

01500K‡-944

3.6

01500U‡-944

1.8

1500/1125

01500P‡-944

3.6/3.1

750

2450

2250

02250D‡-944

6.2

02250K‡-944

5.4

02250U‡-944

2.7

2250/1690

02250P‡-944

5.4/4.7

1000

3280

3000

03000D‡

8.3

03000K‡

7.2

03000U‡

3.6

3000/2250

03000P‡

7.2/6.2

500

1640

2000

02000D‡-1198

5.6

02000K‡-1198

4.8

02000U‡-1198

2.4

2000/1500

02000P‡-1198

4.8/4.2

750

2450

3000

03000D‡-1198

8.3

03000K‡-1198

7.2

03000U‡-1198

3.6

3000/2250

03000P‡-1198

7.2/6.2

1000

3280

4000

04000D‡

11.1

04000K‡

9.6

04000U‡

4.8

4000/3000

04000P‡

9.6/8.3

500

1640

2500

02500D‡-1452

6.9

02500K‡-1452

6.0

02500U‡-1452

3.0

2500/1875

02500P‡-1452

6.0/5.2

750

2450

3750

03750D‡-1452

10.4

03750K‡-1452

9.0

03750U‡-1452

4.5

3750/2817

03750P‡-1452

9.0/7.8

1000

3280

5000

05000D‡

13.9

05000K‡

12.0

05000U‡

6.0

5000/3750

05000P‡

12.0/10.4

500

1640

3000

03000D‡-1655

8.3

03000K‡-1655

7.2

03000U‡-1655

3.6

3000/2250

03000P‡-1655

7.2/6.2

750

2450

4500

04500D‡-1655

12.5

04500K‡-1655

10.8

04500U‡-1655

5.4

4500/3380

04500P‡-1655

10.8/9.4

1000

3280

6000

06000D‡

16.7

06000K‡

14.4

06000U‡

7.2

6000/4500

06000P‡

14.4/12.5

For three-phase units a double pole relay or thermostat is required.

www.indeeco.com

800-243-8162

CAI (Flat)

CASI (Sloped)

37 (16.8)

37 (16.8)

47 (21.3)

47 (21.3)

57 (25.9)

57 (25.9)

67 (30.4)

67 (30.4)

79 (35.8)

79 (35.8)

25.0/21.6

1640

‡Standard colors - Add W for white finish or A for almond finish to the end of catalog number when ‡ is indicated. Special or custom colors - See inside back cover for color codes to be added to end of catalog number where ‡ is indicated.

Weight Lbs (kg)

20.8/18.0

500

Other voltages available, consult factory.

30

Heater Code

Weight Lbs (kg) CAI (Flat)

CASI (Sloped)

37 (16.8)

37 (16.8)

47 (21.3)

47 (21.3)

57 (25.9)

57 (25.9)

67 (30.4)

67 (30.4)

79 (35.8)

79 (35.8)

Thermostats Line Voltage Thermostats (APPLICABLE WHEN ON/OFF LINE VOLTAGE CONTROL IS REQUIRED) Catalog Number

Switch Type

Color

Type

Tamperproof

901-124640

Bimetal

Beige

SPST

No

No

Bimetal

White

No

No

901-124642 901-124643 901-TH114-A-240D

SPST DPST DPST

901-OTH2750 901-OTH2750P 901-OTH4000

Electronic

White

Yes

Digital

Pulse

901-OTH4000P

Amps @ 277V

Pilot Duty

Positive Off

Temperature Range 0F

22

19



No

40-80

22

19



[email protected] 208 & 240





11.5





11.5

16



16.7





16.7





Thermo- Amps @ meter 120-240V

901-OTH5007



14.4



901-OTH5007P



14.4



No Yes

40-80

Yes

40-86 No

Low Voltage Thermostats (APPLICABLE WHEN R2 OPTION IS INCLUDED) Catalog Number

Switch Type

Color

Type

Tamperproof

901-1006998

Bimetal

White

SPST

No

No

901-219981

Bimetal

White

SPST

No

No

Amps @ 277V

Pilot Duty

Positive Off

Temperature Range 0F





30VA at 30V max

Yes

50-90





30VA at 30V max

Yes

45-95

Thermo- Amps @ meter 120-240V

Low Voltage Electronic Thermostats (APPLICABLE WHEN R7 TRIAC OPTION IS INCLUDED) Amps @ 277V

Output Signal

Positive Off

Temperature Range 0F





20mA Max at 8 VDC

No

50-90

Digital





24VAC (.5A)

No

40-86

No

Digital





24VAC (.5A)

No

40-86

No

Digital





24VAC (.5A)

No

40-86

Catalog Number

Switch Type

Color

Type

Tamperproof

901-1016941

Electronic

Beige

DC Pulse

No

No

901-OTH824

Electronic

White

Pulse

Yes

901-TH115-AF-024T-15S Electronic

White

Pulse (15 min. cycle)

White

Pulse (15 min. cycle)

901-TH115-AF-024T/U

Electronic

www.indeeco.com

Thermo- Amps @ meter 120-240V

800-243-8162

31

Controllers and Accessories Controllers Catalog Number

Description

Amps @ 120-240V

Amps @ 277V

Input Signal

901-RT850

Triac Relay without transformer (pulsing) 120/208/240/277 V

23

23

24 VAC & 4-32 VDC

901-RT850T-240

Triac Relay with transformer 208/240 V

23



24 VAC

901-RT850T-277

Triac Relay with transformer 277 V



23

24 VAC

901-RC840

On-Off Relay without transformer 120/208/240/277 V

22

18



901-RC840T-240

On-Off Relay with transformer 208/240 V

22





901-24A05A-1

On-Off Relay with transformer

25





901-RC840T-277

On-Off Relay with transformer 277 V



18



Accessories -

Clear universal thermostat guard. Protects both line and low voltage thermostats against vandalism, damage, and unauthorized adjustment of thermostat settings.

Catalog Number

Description

901-124644

Inside dimensions: 6-3/8” x 3-1/2”, 3” (depth)

901-F29-0198

Inside dimensions: 8-1/4” x 5-3/8”, 3-1/2” (depth)

901-124642 901-124643

901-OTH5007

901-124640

901-OTH 4000P

901-OTH2750

901-OTH 4000

901-OTH2750P

901-1006998 901-219981

901-1016941

901-OTH824

901-TH114-A-240D

901-RC840 901-RC840T240 902-RC840T-277

32

901-RT850 901-RT850T-240

www.indeeco.com

901-F29-0198 800-243-8162

901-124644

Other Product Catalogs Explosion-proof and Fan-forced Electric Unit Heaters

Wall, Ceiling & Floor Heaters

www.indeeco.com

800-243-8162

33

Limited Warranty Industrial Engineering and Equipment Company (INDEECO) new products are warranted against defects in workmanship, material, design, labeling and packaging. No other warranty, expressed or implied, written or oral, applies. No person other than an officer or the general manager of INDEECO is authorized to give any other warranty or assume any liability. Warranty Period This warranty is effective for eighteen months from the date of shipment of the product from INDEECO’s factory, or for twelve months from the date the product is first placed into service, whichever period lapses first. Conditions of Warranty INDEECO products must be installed, operated, and maintained in accordance with INDEECO’s instructions. INDEECO is not liable for damage or unsatisfactory performance of the product resulting from accident, negligence, alteration, unauthorized repair, improper application or installation of the product, improper specifications, or corrosion. INDEECO IS NOT LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. Claims against carriers for damage in transit must be filed by the purchaser with the carrier.

34

www.indeeco.com

Remedy Contact INDEECO at (314) 644-4300, for a Return Material Authorization Number (RMA#) and return instructions. If after receipt of the product and the claim, INDEECO finds to its reasonable satisfaction that the product is defective in workmanship, material, design, labeling or packaging, the product will be repaired or replaced, or the purchase price refunded at INDEECO’s option. There will be no charge to the purchaser for parts or labor. Removal and reinstallation of the product, and shipment of the product to INDEECO for repair or inspection, shall be at the purchaser’s risk and expense. THE REPAIR, REPLACEMENT, OR REFUND PROVIDED FOR IN THIS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER. THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE TERMS OF THIS LIMITED WARRANTY.

800-243-8162

Color Selection Chart Standard Colors 900 Series

White (W)

Almond (A)

Refer to catalog listings for standard and special color availability. Use color codes in parentheses when specifying and ordering. Custom colors are also available on 900 Series. Special and Optional Colors subject to setup charges. Colors represented are approximate.

Special Colors 900 Series

Metallic Silver (AE)

Metallic Charcoal (CM)

Bronze (BZ)

Aluminum (AL)

Semi-Gloss Black (BK)

www.indeeco.com

800-243-8162

35

425 HANLEY INDUSTRIAL COURT ST. LOUIS, MO 63144 314-644-4300 • Fax: 314-644-5332 www.indeeco.com • [email protected] FOR YOUR NEAREST INDEECO REPRESENTATIVE CALL: 800-243-8162

36

www.indeeco.com

800-243-8162

90-1007-80 1M0116

Loading...

Baseboard & Convector Heaters - Indeeco

C90B Baseboard & Convector Heaters commercial & industrial electric heating and controls www.indeeco.com 800-243-8162 1 Introduction INDEECO off...

2MB Sizes 0 Downloads 0 Views

Recommend Documents

Winter Demand Response Using Baseboard Heaters - aceee
While smart thermostats have been around for a few years for HVAC central systems, their equivalent for the control of e

Hydronic baseboard heaters make use of heated liquids and even
Hydronic baseboard heaters make use of heated liquids and even water to regulate room temperature or particular location

residential gas water heaters - American Water Heaters
ALL TECHNICAL AND WARRANTY QUESTIONS: SHOULD BE DIRECTED TO THE LOCAL DEALER FROM WHOM THE WATER HEATER WAS. PURCHASED.

COMMERCIAL ELECTRIC WATER HEATERS
This manual does not replace or supersede the Instruction Manual that came with the water heater. Always refer to the ..

Electric Storage Heaters
Mar 8, 2017 - Ini tersedia sebagai tablet sublingual yang larut di bawah lidah (karena sistem pencernaan dapat memodifik

Air Heaters - Watlow
adapted to many non-pressurized air-heating systems. ... CFM measured at standard conditions .... minute according to th

Condensing High Efficiency Domestic Water Heaters, Pool Heaters
Fully Condensing –. Ultra Efficient. The gas-fired Futera Fusion Series brings the field-proven performance of RBI boi

use and care manual - Paloma Water Heaters Paloma Water Heaters
symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety

Raypak Commercial Water Heaters - Airskill
5601/AG601 and electrical codes and/or statutory body codes and regulations. INSTALLATION. PROCEDURES -. INSPECTION OF.

Condensing Boilers and Low-Temperature Baseboard - NYSERDA
Aug 11, 2011 - making it difficult to determine the most efficient setup at install. b. Manuals provide little to no rec